Sound Deadening and Insulation for Defenders
Our much-loved Land Rover Defenders can be on the noisy side at times; however, the good news is that this can be alleviated with Sound Deadening and Insulation sheets. There are no quick fixes to reduce road and engine noise and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive. Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.
Small Horsebox Windows
We design and manufacture tinted bonded windows and roof hatches for luxury horseboxes or horse lorries/wagons/trucks.
Our range of horsebox windows suitable for smaller horseboxes include the following:
- PAN560x375 - Dimensions 560mm x 375mm - Aperture Dimensions - 455mm x 285mm
- PAN720x513 - Dimensions 720mm x 513mm - Aperture Dimensions - 605mm x 423mm
- PAN1320x513 - Dimensions 1320mm x 513mm - Aperture Dimensions - 1057mm x 427mm
- Zeppelin Side Sliding window - Dimensions 1094mm x 470mm - Aperture Dimension - 1054mm x 440mm
Our bonded tinted windows are reversible and have a 70% Dark-tint that reduces glare and heat.
Fitting Note: When installing sliding windows, please make sure that the sliding section of the glass is pointing to the rear of the vehicle for correct installation.
All Masai Omega Automotive/ Horsebox Glass have the following features:
- Beautiful, sleek and innovative future-proof designs
- Factory prepared tints (built in tint, not a film) reflect heat and reduce glare
- E43R approved 4mm toughened safety glass
- We polish all glass edges for extra safety.
- Leak proof, draft proof.
- High quality rubber seals to keep drafts and rain out - all frames tested for water leakage.
- Our drainage holes are rectangular - unlike circular holes which would force water in when vehicle is moving.
- Premium quality flock lining to ensure the glass slides smoothly
- Durable and attractive high quality button locks / lever catch mechanisms
- All screws and components are silicon covered to avoid water ingress
- Silicone adhesive we recommend has a heat tolerance of minus 40 to plus 90 degrees C
Toughened Glass and Aluminium Roof Hatch / Roof Vent / Roof Light - (500x500 / 970x530)
Roof Hatch designed for 4x4, horse boxes, mobile exhibition trailer, campervan, motor home, coach, lorry, bus or any vehicle, porta-cabin, enclosure, etc - where increased light and ventilation is needed but not at the expense of security. Horsebox roof hatch / vent, trailer roof hatch, coach roof hatch light window, motor home roof light.
- Black powder coated aluminium frame.
- Screen printed with dot fading to reduce sun light glare and reduce heat.
- E43 4mm toughened glass.
- Injection moulded handles.
- Provides ventilation gap back, front or both - by way of a sprung scissor mechanism.
- When closed, the spring mechanism ensures the Roof Vent is fully sealed against the weather.
- Available in 500x500mm and 970x530mm variants.
