Sound Deadening and Insulation for Defenders
Our much-loved Land Rover Defenders can be on the noisy side at times; however, the good news is that this can be alleviated with Sound Deadening and Insulation sheets. There are no quick fixes to reduce road and engine noise and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive. Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.
Replacement Rear Door Card/Trim for Defender 90/110 (Pre 2002)
The rear door trim panel on Pre 2002 Defenders has long been the weak spot of any Land Rover interior. Until now the only replacement option has been the less than durable genuine trim made of vinyl covered hardboard, industrial looking chequer-plate or a home made plywood replacement. This replacement rear door card is the first real 'factory style' alternative that is both durable and aesthetically pleasing.
This door card will also fit Series vehicles with some minor trimming.
The net included measures 410mm x 200mm and uses top quality close weave elasticised mesh netting.
This can be fitted by any competent DIY'er and requires no specialist tools. Due to Land Rovers less than perfect build tolerances there is some minor trimming of the plastic required.
This kit will contain the following as shown in photo above:
- 1 x Rear Door Trim Panel
- 1 x Storage Net and 5 x fixing hole plugs.
- 2 x Long angled fixing brackets
- 2 x Short Angled fixing brackets
- 2 x Grab Handle fixing bolts and 2 x washers
- 15 x Self tapping screws
- 12 x Plastic screw/rivets
