Sound Deadening and Insulation for Defenders
Our much-loved Land Rover Defenders can be on the noisy side at times; however, the good news is that this can be alleviated with Sound Deadening and Insulation sheets. There are no quick fixes to reduce road and engine noise and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive. Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.
Truck-Lite 7" Ultra Bright LED Headlights with DRLs, Long Life V2.
Sold as PAIR. See below for the optional extras.
Sealed beam LED headlights with dipped beam and main beam functions. Has the option to show day time running lights (DRLs). Assuming your vehicle can take 7" lights, they are perfect for off-road vehicles (e.g. Defenders), motorcycles, heavy duty trucks, military applications and more. Available in left and right hand drive traffic versions.
With the appearance of a pure white light, LED headlamps run at lower power than Halogen and Xenon alternatives, ensuring up to 50x longer life, and offer the same forward visibility without the harsh glare.
These high-quality US made LED headlights have military grade die-cast aluminium housings, non-yellowing polycarbonate lenses which offer superior protection against impact from road debris and other hazards and use a H4, 3-Blade connector.
When choosing LHD or RHD, generally RHD is for the UK (Left Hand Traffic), and LHD is for Europe and USA (Right Hand Traffic) etc.
- ECE and ROHS Compliant.
- Made in the USA.
- 2nd Generation Truck-Lite Headlights (Phase 7) - Improved LEDs and beam pattern.
- E13 marked (UK MOT Compliant).
- OSRAM LED Sealed Beam Technology with Polycarbonate Lens and Sealed Electronics.
- Hard-Coated Polycarbonate Lens.
- Overall diameter is 7 inches, 177mm.
- Will fit vehicles that have 7 inch headlamps.
- eCoat Aluminium Housing and Internal Structures.
- Metalised Reflector.
- Dipped and Main beam functions.
- 1.3mm CSA / 16 Gauge Wire.
- Standard H4 socket, 3-blade wiring connector.
- 1300 Lumens each.
- 2 LED Arrays.
- Multi-Volt (9V-33V) Design Works With Both 12V And 24V Systems.
- Headlamp: 1.3A (Dipped/Passing) @ 13.2V.
- Headlamp: 2.3A (Main/Driving) @ 13.2V.
- Headlamp: 0.6A (Dipped/Passing) @ 26.4V.
- Headlamp: 1.1A (Main/Driving) @ 26.4V.
- Position Lamp: 0.03A @ 13.2V, 0.03A @ 26.4V.
- Operating Temperature Range: -40C To 50C.
- Over-voltage Protection to 600V.
- 3 Year Warranty. Rated for 100,000 hours+ of usage.
Optional Extras
Here are some optional extras which go with these headlights. You can purchase them below, or use the popup when you add the headlamps to your cart.
- Pair of Outer Retaining Rings - either Stainless or Black powder-coated
- Pair of 7" Headlamp Bowls
