Sound Deadening and Insulation for Defenders
Our much-loved Land Rover Defenders can be on the noisy side at times; however, the good news is that this can be alleviated with Sound Deadening and Insulation sheets. There are no quick fixes to reduce road and engine noise and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive. Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.
Outer Sill Rail - One Piece 3mm Aluminium for Land Rover Defender 90 and 110
If your Land Rover Defender's sill panels are worse for wear try these 3mm thick aluminium ONE piece Sill Panels.
The cleats are bonded on using structural adhesive to avoid sink marks on the face of sill panel. They have been CNC pressed, laser cut, welded and dressed off ready to apply paint and fit.
Fixings are included and consists of:
- 8no M6 A4-80 x 25mm Hex Head Bolts
- 4no M6 A4-80 x 30mm Hex Head Bolts
- 4no M6 A4-70 x 25mm Domed Head Cup Sq Bolts
- 28no M6 A4 Flat Washers
- 16no M6 A4-80 Flanged Serrated Nuts
- Please note: A4-80 is the equivalent of Mild Steel 8.8 high tensile bolts
Defender 90 Part Numbers LHS Front RTC6205/Rear MTC8293 & RHS Front RTC6206/Rear MTC8292
Defender 90 Part Numbers LHS Front RTC6205/Rear RTC6210 & RHS Front RTC6206/Rear RTC6209
