Sound Deadening and Insulation for Defenders
Our much-loved Land Rover Defenders can be on the noisy side at times; however, the good news is that this can be alleviated with Sound Deadening and Insulation sheets. There are no quick fixes to reduce road and engine noise and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive. Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.
Nudge Bar (A-Bar / A-Frame) for Off-roading Land Rover Defenders
NOTE: This nudge bar has been designed to fit Air Con and Non Air Con vehicles without further modification and slimline lights, however some front grilles (such as the SVX style grille) require the extension brackets for which will give an addition 50mm of clearance. Additionally, if you going to be fitting large depth lights (such as HID lights) you will need the light extension brackets. Both of these two sets of optional brackets, are can be separately added to your cart (see section lower down this page).
- NOTE: Nudge Bars / A-Bars are for Off-road use only - remove when on the public highway.
- Suitable for Land Rover Defender 90 and 110 models.
- Fits on top of the existing bumper fixing points.
- Bumper not included as shown in photos.
- Highest quality tubular steel 2.5" (60 mm) diameter.
- Zinc plated for long life rust protection and black powder coated.
- It has front brackets with eyelets for mounting lights.
Dimensions when fitted:
- Length: 790mm
- Height: 430mm
- Bar Thickness: 60mm
- Distance from grille: 110mm
Optional extras, (add them below)
We have the option to add an extension bracket for vehicles with aircon fitted and also another extension bracket for fitting lights to A-Bar where the light unit depth requires additional space. The lighting extension bracket has 12mm holes with 50mm centres.
- Extension Brackets for Air-Con Vehicles
- Lighting Extension Bracket for Nudge Bar
