Sound Deadening and Insulation for Defenders
Our much-loved Land Rover Defenders can be on the noisy side at times; however, the good news is that this can be alleviated with Sound Deadening and Insulation sheets. There are no quick fixes to reduce road and engine noise and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive. Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.
Masai Middle Row Door Glass for Land Rover Defender 110 (4 Pieces)
This Defender middle-row door glass kit includes nearside and offside (LH and RH) glass and quarters - 4 pieces in total. Available as 5% green or 70% dark privacy tint (no-light transmission factory prepared tint). The standard LR is either 5% green or clear.
- The dark tint version is 70% no-light transmission factory-prepared privacy tint. These match our dark-tinted rear-side sliding windows.
- E43R approved 4mm toughened safety glass. European Commission Directive 2001/92/EC, regulation No. 43 of the UN/ECE.
- Reflects heat and reduces glare.
- Premium build quality and polished edges.
- Factory-prepared tint, NOT a glued-on film.
- DIY fitting - in 2-3 hours. Fitting Service available - give us a call.
Dimensions IMPORTANT:
The fixed rectangle pieces are 145mm wide. Some very old Defenders have middle-row fixed glass that is 136mm wide, you will need to get new window channels in your door to remedy this issue.
Land Rover part numbers: LR033150 (ALR4775 CVB500790), LR033151 (ALR4777 CVB500780)
Optional Extras
We think you may also be interested in these optional extras which you can see below and separately add to your shopping cart. Scroll down to "You May Also Like" section.
- Window Clip Glass Holders (pack of 4) - they connect the mechanism to the glass) OEM part number is STC4787.
- Adhesive - to attach glass to glass holder clips
