Sound Deadening and Insulation for Defenders
Our much-loved Land Rover Defenders can be on the noisy side at times; however, the good news is that this can be alleviated with Sound Deadening and Insulation sheets. There are no quick fixes to reduce road and engine noise and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive. Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.
Internal Window Trims Kit for Land Rover Defender 90 - PUMA TDCi (4 Pieces)
Spruce up the interior of your Defender 90 PUMA TDCi fitting an internal window trim kit. Including rear side window and quarter light trims - 4 pieces in total - Masai's internal window trim kit covers the bare metal surrounding the rear side windows and quarter lights.
These kits are supplied in black or grey finish but can easily be painted to your requirements.
Fits TDCi/Puma windows with forward facing seats and 70mm lower window radius.
- Rear side window internal trims AND quarterlight internal trims (4 pieces - see thumbnails)
- Ideal for replacing worn trim kits or converting a panel-van into a County spec.
- Equivalent to official Land Rover part numbers EQT500480LOY, EQT500490LOY, EQT500620LOY, EQT500630LOY
- Top corner radius' is 50mm and bottom corner radius' is 70mm.
- When upgrading from a hardtop to County Station Wagon you will need to have either use one of our bulkhead reduction kits or cut the trim to bypass the full bulkhead as shown in the photo.
- DIY installation in under an hour. (Fitting service available.)
- Fixing kit is included
Download Internal Trim Fitting Instructions.
We highly recommend this extra:
(See "You May Also Like" section below to add any extras to your basket).
Pair of Internal Window Trims Finisher Posts - please pick a colour
Trims Finisher Posts are highly recommended extras to neaten up the edges and fill the gaps. These window trim finisher posts are available as uncovered plastic or covered in the same material and colours as our internal window trim kits and are available for Defender 90 and 110 models up to 2016.
You may also be interested in these optional extras:
Station Wagon conversion retaining clips
If your vehicle is NOT a factory station wagon, and you are converting to a station wagon, then you will need these clips to secure the internal window trims. Land Rover part number MXC3277.
Interior LED Vehicle Strip Lights
Enhance and brighten the interior of your vehicle with low-power consumption LED strip lights. Various Sizes and Voltages: 245mm long, 400mm long, or 555mm long. We think our internal window trim kits look fantastic paired with a set of these strip lights, which add a bespoke twist to a utilitarian classic.
Internal grab handles
An internal Grab Handle for Defender headlining fits above the side windows and the rear door. They also help retain the headlining. Billet Aluminium and Plastic alternatives are available. Land Rover part no JPC5640LNF.
