Sound Deadening and Insulation for Defenders
Our much-loved Land Rover Defenders can be on the noisy side at times; however, the good news is that this can be alleviated with Sound Deadening and Insulation sheets. There are no quick fixes to reduce road and engine noise and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive. Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.
Interior Window Trims for Defender 2-Door Hardtop Conversion to Station Wagon
This set of Defender interior window trims have been developed to enable the conversion of a Defender 2-door hardtop to a 110 station wagon where two pairs of our MUC770 windows are to be fitted. This allows for a symmetrical look to the vehicle inside and out.
These interior trim kits are supplied pre-covered with a suede effect fabric to suit most Land Rover interiors, you can match to your headlining, or seats or carpet colours.
- Included: Fir Tree Clip Adhesive Coverings - We supply a sheet of adhesive fabric with cut-outs, that allow you to stick onto the fir trees to match the colour to the Internal trims. (See photo in the thumbnails above) - These come supplied for ALL 9 different colours!
- Manufactured by Masai using high-quality GRP and covered in high-quality fabric.
- DIY installation. See video and PDF
Note: This product will show as IN STOCK to allow you to order, however there might be a 4-6 week lead time. Your chosen colour choice could be available right away, in that case you will receive within 2-5 working days after making payment. You're welcome to call us and enquire about which colours we have available now.
Download Internal Trim Fitting Instructions.
We highly recommend these extras:
See "You May Also Like" section below to add any extras to your basket. Please call us if you need advice.
Station Wagon Conversion Lower Retaining Clips
If your vehicle is NOT a factory station wagon, and you are converting to a station wagon, then you will need these clips to secure the internal window trims. Land Rover part number MXC3276.
Pair of Internal Window Trims Finisher Posts - please pick a colour
Trims Finisher Posts are highly recommended extras to neaten up the edges and fill the gaps. These window trim finisher posts are available as uncovered plastic or covered in the same material and colours as our internal window trim kits and are available for Defender 90 and 110 models up to 2016.
You may also be interested in these optional extras:
Set of Trim Fitting Spacers for vehicles with Inward Facing Rear Seats
If you have Inward Facing Rear Seats. Spacers enable the safe securing of inward-facing seats through the interior window trim on TD5 model Defenders (1987-2006). Made from black plastic they replace the original metal parts providing support for bolts that secure the seats to the vehicle frame. The support provided by the spacer secures the internal trim and ensures no distortion or wear and tear as the bolts are tightened. The softer plastic material causes less wear and tear to the interior trim and reduces internal vibration. Each interior window trim requires 5 spacers and so this convenient kit enables you to undertake the complete job with minimum fuss.
Interior LED Vehicle Strip Lights
Enhance and brighten the interior of your vehicle with low power consumption LED strip lights. Various Sizes and Voltages: 245mm long, 400mm long, or 555mm long. We think our internal window trim kits look fantastic paired with a set of these strip lights, which add a bespoke twist to a utilitarian classic.
