Defender Sound Deadening and Heat Proofing

Sound Deadening and Insulation for Defenders

Our much-loved Land Rover Defenders can be on the noisy side at times; however, the good news is that this can be alleviated with Sound Deadening and Insulation sheets. There are no quick fixes to reduce road and engine noise and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive. Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.

Heated Windscreen Wiring Kit with Switch for Land Rover Defender

SKU: WHFWS-CRLNG
£135.00
Price Includes 20% VAT (20%) £22.50
Switch Type
In stock
1
Save this product for later
Have questions?
Share this product with your friends
Heated Windscreen Wiring Kit with Switch for Land Rover Defender
Product Details
Application: Wiring for Heated Windscreen
Suitable Vehicle: Land Rover Defender

Heated Windscreen Wiring Kit with Switch for Land Rover Defender

You can retro fit a heated windscreen into your Defender using this wiring kit, and we offer two versions depending on the age of your Defender.

  • Available with a genuine Land Rover OEM switch suitable for TD5 and Puma (2002-2016) (part number YUG000460LNF and female connector YPC10524), or a Carling Contura switch suitable for earlier dash boards (Pre 2002) - (requires mounting).
  • The third option, rocker type switch is for earlier Defenders (200TDi, 300TDi & early TD5s) with no space in the dash area for carling switches. See photos above. The switch fits to the right of the steering wheel underneath the instruments panel.
  • The rocker type switch wiring kit can also be connected to heated wing mirrors as well. It is on a 10 minute timer once activated. But can be manually switched off as well.
  • Land Rover Defender Windscreen Wiring Harness kit suitable for windscreens with 2 tab wires on each corner.
  • Kit requires minimal connections such as positive and negative power, ignition, live and illumination live.
  • Rated at 20A with a 10 minute timer relay and suitable for Land Rover heated windscreen part number CMB000411 or equivalent.
  • Comes with 500mm power cable from relay to battery. Battery end connection is fitted with a M8 ring terminal.
  • Heated screen supply cable is 3m long from relay to the screen terminals with insulated female spade.
  • Screen earth cable is 500mm and has a female spade and M8 ring terminal.

Download Heated Windscreen Wiring Instructions.