Sound Deadening and Insulation for Defenders
Our much-loved Land Rover Defenders can be on the noisy side at times; however, the good news is that this can be alleviated with Sound Deadening and Insulation sheets. There are no quick fixes to reduce road and engine noise and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive. Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.
Masai Front Door Glass for Land Rover Defender 90, 110 and 130 - NS and OS.
Our Defender front door glass is sold as a pair - nearside and offside (LH and RH), and available in three tint variations (standard LR is either 5% green or clear).
- 5% green tinted glass (5% no-light transmission factory-prepared tint)
- 15% galaxy grey tinted glass (15% no-light transmission factory-prepared tint)
- 65% extra dark tinted glass (65% no-light transmission factory-prepared tint) (PLEASE NOTE: These 65% dark front side windows are illegal under UK legislation, as you're only allowed up to 30% tint. If you reside outside of the UK, please check your country's/state law regarding tinted front door windows.)
- Factory-prepared tint, NOT a glued-on film.
- E43R approved 4mm toughened safety glass. European Commission Directive 2001/92/EC, regulation No. 43 of the UN/ECE.
- Premium build quality. Polished edges.
- DIY fitting - in 2-3 hours. Fitting Service available - just call us.
Land Rover OE Part Numbers:
ALR4773 Clear RH side, ALR4771 Clear LH side, ALR4774 Grey Tint RH side, ALR4772 Grey Tint LH side
Optional Extras
We think you may also be interested in these optional extras which you can see below and separately add to your shopping cart. Scroll down to "You May Also Like" section.
- Window Clip Glass Holders (pack of 4) - they connect the mechanism to the glass) OEM part number is STC4787.
- Adhesive - to attach glass to glass holder clips
