Sound Deadening and Insulation for Defenders
Our much-loved Land Rover Defenders can be on the noisy side at times; however, the good news is that this can be alleviated with Sound Deadening and Insulation sheets. There are no quick fixes to reduce road and engine noise and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive. Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.
Awning Mounting Bracket - singles
This awning fitting bracket has welded gussets to provide additional strength when awnings are mounted to roof bars on vehicles used off-road or under extreme conditions.
Add 2 or 3 to the shopping cart depending on requirements.
Zinc plated and black powder coated for corrosion resistance and designed to mount either upright or inverted.
Bracket is 50mm wide. Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength.
The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning.
