The Masai Sliding Side Step
Sliding Side Step suitable as: a minibus side step, a taxi side step, caravan step, motor home step, horsebox side steps, coach side step, van side step, campervan step, ambulance side sliding step, etc.
The Masai Sliding Side Step width is 400mm, length is 600mm.
A high quality sliding side step made of aluminium and manufactured by Masai Omega Automotive. Sliding Side Step Fitting Instructions and Maintenance Tips provided. It has approval from the VCA (Vehicle Certification Agency) July 2011 – Click here to view the report; and it fully meets the requirements of the Large Bus Construction Directive 2001/85/EC regulation 107.02 up to and including supplement 5 ECE Regulation 107.03.
The Sliding Side Step maybe of interest to :
- Bus, minibus and taxi manufacturers
- Ambulance manufacturers
- Horsebox manufacturers and converters
- Van converters
- Taxi converters
- Campervan and motor home manufacturers and converters
- Or private individuals who are upgrading any of the above vehicles themselves.
[fvplayer src=”https://www.masai4x4.com/wp-content/uploads/Masai-side-sliding-step.mp4″ width=”460″]
Windscreen Finisher / A-Post Trim Cover - Land Rover Defender (PAIR)
These black plastic trim pieces are designed to go around the windscreen as a finishing trim. These parts are designed to replace genuine Land Rover part numbers MWC2314 and MTC 5212.
As an alternative to these uncovered A-Post trim pieces, we also offer a Masai covered version of this A-post to match our headlinings, sun visors and internal window trim products.
Fitting Instructions for Windscreen Finisher/ A-Post Trim Cover
Simply unscrew your existing trim cover and replace with your new trim cover. When screwing your new trims in place be careful to ensure the wiring and rear windscreen washer pipe that run under the trim are safely in place and not impinged. It is recommended to use a hand screw driver for securing in place. DO NOT USE AN IMPACT DRIVER as this may damage the trim cover.
