The Masai Sliding Side Step
Sliding Side Step suitable as: a minibus side step, a taxi side step, caravan step, motor home step, horsebox side steps, coach side step, van side step, campervan step, ambulance side sliding step, etc.
The Masai Sliding Side Step width is 400mm, length is 600mm.
A high quality sliding side step made of aluminium and manufactured by Masai Omega Automotive. Sliding Side Step Fitting Instructions and Maintenance Tips provided. It has approval from the VCA (Vehicle Certification Agency) July 2011 – Click here to view the report; and it fully meets the requirements of the Large Bus Construction Directive 2001/85/EC regulation 107.02 up to and including supplement 5 ECE Regulation 107.03.
The Sliding Side Step maybe of interest to :
- Bus, minibus and taxi manufacturers
- Ambulance manufacturers
- Horsebox manufacturers and converters
- Van converters
- Taxi converters
- Campervan and motor home manufacturers and converters
- Or private individuals who are upgrading any of the above vehicles themselves.
[fvplayer src=”https://www.masai4x4.com/wp-content/uploads/Masai-side-sliding-step.mp4″ width=”460″]
Masai "Warrior" Bonnet Scoop for Land Rover Defender - GRP - BLACK
- Suitable for all Defenders - TD5 and 200/300Tdi only.
- PLEASE NOTE: This Defender bonnet scoop is made of GRP with black gel coat (RAL 9005) as standard but does require suitable preparation (some filling and priming) and final painting. Do not oven bake your paint finish.
- This is a SCOOP only, it fits onto your existing TD5 Bonnet.
- The "Warrior" style bonnet scoop is more heavily contoured than the Masai Sports Bonnet Scoop.
- Measurements (Roughly): Width: 92cm (at top) 62cm (at bottom), Length: 86cm, Height: 7cm.
Fitting Guide
You will need to remove your bonnet from your Defender and drill holes and bolt the scoop to your bonnet. As they will be visible, we recommend a nice-looking stainless steel bolt to complete the look of your vehicle.
