The Masai Sliding Side Step
Sliding Side Step suitable as: a minibus side step, a taxi side step, caravan step, motor home step, horsebox side steps, coach side step, van side step, campervan step, ambulance side sliding step, etc.
The Masai Sliding Side Step width is 400mm, length is 600mm.
A high quality sliding side step made of aluminium and manufactured by Masai Omega Automotive. Sliding Side Step Fitting Instructions and Maintenance Tips provided. It has approval from the VCA (Vehicle Certification Agency) July 2011 – Click here to view the report; and it fully meets the requirements of the Large Bus Construction Directive 2001/85/EC regulation 107.02 up to and including supplement 5 ECE Regulation 107.03.
The Sliding Side Step maybe of interest to :
- Bus, minibus and taxi manufacturers
- Ambulance manufacturers
- Horsebox manufacturers and converters
- Van converters
- Taxi converters
- Campervan and motor home manufacturers and converters
- Or private individuals who are upgrading any of the above vehicles themselves.
[fvplayer src=”https://www.masai4x4.com/wp-content/uploads/Masai-side-sliding-step.mp4″ width=”460″]
Rear Door Glass - Dark Tinted and Heated for Post 02' Land Rover Defenders 90/110 - (Sealed in)
This rear door glass is for Post 2002 rear doors for Land Rover Defenders. (Original Part Number: LR042729). You fit it with a rubber seal (optional extra below). Either re-use your old seal or purchase a new seal. This comes in 2 versions, one with the screen printing for the High-Level Brake light and one without.
- Standard size replacement. (Original Part Number: LR042729)
- High-quality Masai product.
- 4mm toughened (tempered) safety glass E43R, 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
- 70% no light transmission high quality factory-prepared dark tint, NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
- Heat reflecting coating, glare reduction glass.
FITTING NOTES
Carefully remove rear door glass without damaging the rubber - as you may want to re-use it (although you can buy a new seal in this product's options). Carefully remove brake light from old glass as you will need to glue it to the new glass.
Optional Extras
We think you may also be interested in these optional extras which you can see below and separately add to your shopping cart. Scroll down to "You May Also Like" section.
- Rear Door Glazing Seal - for Post 2002 Defenders only (Land Rover part number CVW500010).
- Pair of studs - to fit high-level brake lights
- Rear High-Level LED Brake Light - slimline, standard or 3-colour.
- Matching quarter light windows
- Quarter light seals - if you add quarter light windows
