The Masai Sliding Side Step
Sliding Side Step suitable as: a minibus side step, a taxi side step, caravan step, motor home step, horsebox side steps, coach side step, van side step, campervan step, ambulance side sliding step, etc.
The Masai Sliding Side Step width is 400mm, length is 600mm.
A high quality sliding side step made of aluminium and manufactured by Masai Omega Automotive. Sliding Side Step Fitting Instructions and Maintenance Tips provided. It has approval from the VCA (Vehicle Certification Agency) July 2011 – Click here to view the report; and it fully meets the requirements of the Large Bus Construction Directive 2001/85/EC regulation 107.02 up to and including supplement 5 ECE Regulation 107.03.
The Sliding Side Step maybe of interest to :
- Bus, minibus and taxi manufacturers
- Ambulance manufacturers
- Horsebox manufacturers and converters
- Van converters
- Taxi converters
- Campervan and motor home manufacturers and converters
- Or private individuals who are upgrading any of the above vehicles themselves.
[fvplayer src=”https://www.masai4x4.com/wp-content/uploads/Masai-side-sliding-step.mp4″ width=”460″]
Defender Bumper with Rectangular LED DRLs - Zinc Coated - LR062058
NOTE : Unlike the other bumpers of the same design available online, ours is ZINC COATED for longer lasting rust protection.
SPECIFICATIONS:
- 3mm thick steel, zinc coated and finished in high-quality black powder coating to give your defender a stronger edge strength compared to standard Land Rover Bumpers.
- A direct replacement for the original Land Rover bumper with daytime running lights, which are fitted as standard to most recent Defenders.
- Easy to wire up daytime running lights and fitting instructions are included.
This Defender Bumper will replace the original Land Rover Defender Bumper, part number LR062058.
DOES NOT COME WITH NEW BOLTS. Use your existing bumper bolts or we sell stainless steel bolts as a kit. (See below)
Download Fitting Instructions for DRLs:
Important note: These lights need to be wired directly to the battery to operate correctly.
Optional Extras (purchase below)
Bumper Bolt Set - Stainless Steel. Banish rusty bolts & screw heads! Using these smart stainless steel replacement bolt and screw kits will prevent rust from spoiling your Defender's bodywork - ideal for smartening up your vehicle or a restoration project.
Rubber bumper end caps. We recommend that you also replace any perished rubber end caps to complete your Defender's original look as well as giving protection to your new bumper. Land Rover part number DPT100070
Number Plate Mounting Bracket (MA025699)
