Here we have a wide selection of vehicle lights / work lights / driving lights / LED spot lights / flood lights / LED Light Bars and interior LED Lights. We have high luminosity LED lights and ultra bright Xenon HID lights, some are IP65 and some are IP67 compliant. Some have housings made of diecast aluminium and others are ABS plastic. Most have a wide voltage ranges.
We also have a range of NAS LED lights for Land Rover Defenders, clear sets and coloured sets. These Land Rover Defender NAS LED lights are for all post 1983 90 and 110, include front and rear NAS LED Lights with plinths, are waterproof to IP67, E marked (EU approved) and SAE approved, provide increased visibility (brighter than standard bulbs) and they enhance and modernise the look of your Defender, easy to fit DIY.
We also have a dedicated website for LED and HID Vehicle lights. See individual specifications for details. Call if you have any questions.
Masai Sport Scooped Bonnet with Grille - for Land Rover Defender - GRP
See optional extras below
WARNING: As this bonnet is made of much lighter GRP (Fibreglass), it is not as strong as the steel Land Rover bonnets. Therefore we advise that during use, please be careful when you shut the bonnet and do not slam it shut.
- Suitable for all Defenders - Puma TDCi, TD5, 200/300Tdi.
- PLEASE NOTE: This Defender Puma bonnet is made of GRP with black gel coat (RAL 9005) as standard but will require suitable preparation - some filling, priming and final painting. Do not oven bake your paint finish. We do not recommend just fitting it as is.
- This aftermarket Land Rover Defender Puma Bonnet is made of Glass Reinforced Plastic with steel fixtures for the original fasteners; it is durable and flexible for heavy use.
- Our scooped bonnet with mesh design allows cooling airflow through the mesh but rain is directed to the sides away from the engine block.
- It is light-weight compared to original aluminium Defender bonnets - the net weight is 15KG.
- Noise transmission is much less than the aluminium versions. It will reduce the engine noise.
Important note for Defender 200TDi owners
This coolant tank pointed to above, needs to be moved away from the side of the wings so that it does not impede the movement of the bonnet. We recommend that you use a U-Shaped bracket shown in the photo above to space out the coolant tank so the bonnet can correctly shut.
Optional Extras (purchase below):
Bonnet Stay Kit
If you are upgrading your bonnet from a 200TDi/300TDi with the scissor bonnet stay to a GRP PUMA bonnet you will need this stay kit as your old bonnet stay will not be compatible. TD5 bonnets may also have this PUMA stay kit, so just check what you have already.
