Internal Window Trim Kit for Land Rover Defender 90 – 200/300/Td5. Spruce up the interior of your 200/300/Td5 Defender by fitting an internal window trim kit. Including rear side window and quarter light trims – 4 pieces in total – Masai’s internal window trim kit covers the bare metal surrounding the rear side windows and quarter lights.
These kits are supplied in a dark grey or black finish to suit most Land Rover interiors but can easily be recoloured to taste. We think our internal window trim kits look fantastic paired with a set of our interior strip lights, which add a bespoke twist to a utilitarian classic.
XJS and XJ6 Jaguar Water Pump (including pulley and backplate)
- This is a Jaguar Water Pump - Part No. EBC10566 (& EBC10967)
- Incorporating the 5-Vee Pulley (Part No. EBC10951)
- Includes Backplate
- Application: 1993-1996 4.0 Litre XJS from engine number B100136, 1995-1997 3.2 & 4.0 Litre XJ6 (6-Cylinder cars from Chassis / VIN Number 720125 to 812255)
This is the genuine Jaguar Original Equipment pump. This means that the pump components have been made to original Jaguar drawings and conform with all material and dimensional specifications. All castings are leak-tested prior to final assembly. The components are assembled to specification (exacting tolerances determined by Jaguar) e.g. pulleys are assembled to the correct height to minimise drive belt wear. Impellers are assembled to the correct height to ensure optimum performance and avoid a potentially disastrous foul condition. Bearings and seals are designed to withstand loads and forces prescribed by Jaguar as a result of exhaustive testing under extreme conditions. Assembly processes use load-monitoring to ensure components will not fail prematurely.
The life of a replacement OEM pump can, however, be adversely affected if the car's cooling system is not maintained. Before fitting a replacement pump, it is highly advisable to flush the cooling system under pressure, to clear accumulated debris within the system which can damage the pump if circulated. After the replacement pump has been fitted, the cooling system should be topped up to the correct level with the prescribed proportion of anti-freeze added. Anti-freeze is essential under all temperature conditions as it contains properties which lubricate the water pump seal. Not only does it prevent the coolant from freezing in extreme cold conditions, but it prevents the coolant from boiling in extreme heat.
