Steering Guard for Land Rover Defender

Steering and Sump Guard for Land Rover Defender (6mm thick steel)

A Steering and Sump Guard protects from rock, tree root and stump damage, etc Our Steering and Sump Guard fits all standard Land Rover Defenders, 90, 110 and 130. Its made from heavy duty 6mm thick mild steel with zinc plating. This Defender Steering Guard is very easy to fit, it bolts onto the chassis. Our Land Rover Defender Steering Guard kit includes stainless steel nuts, bolts and washers fitting kit. Standard finish is zinc plating but can easily also be spray painted prior to fitting. Optional high quality colour matching paint service. Land Rover Defender Steering Guard OEM part number is STC50437.

Sunroof - 1157 x 527mm - DARK Tint (Special Order)

SKU: DEF1157x527
£334.80
Price Includes 20% VAT (20%) £55.80
In stock
1
Save this product for later
Have questions?
Share this product with your friends
Sunroof - 1157 x 527mm - DARK Tint (Special Order)
Product Details
Sold As: SPECIAL ORDER (6 WEEKS)

Special Order Sun Roof - 1157 x 527 mm - DARK tint for all kinds of vehicles

VERY IMPORTANT: This particular sunroof takes 6 weeks to manufacture and is specially made to order for you, therefore purchase orders cannot be cancelled once we have started manufacture, therefore no returns nor refunds either. Please call us before ordering if in any doubt.

This sunroof has a variety of uses where increased access, light and ventilation is needed but not at the expense of security.

Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the aperture.

Once you have cut the correct shaped aperture for the Sun Roof, you will need rivets and silicone sealant to attach the Sun Roof.

Please block the drain holes with silicone sealant when used horizontally on a roof. This Sun Roof can also be used vertically on its side - in which case do not block the drain holes.

If you need the Sun Roof completely wide open the gas strut brackets can be unscrewed from the frame.

PLEASE NOTE: You need to abide by all laws, regulations and standard practices with regard to the fitting and usage of these windows.

  • Includes two Gas Struts for smooth opening and closing.
  • Two handle locking with keys.
  • The maximum amount these windows open is as seen in the above photo and is 200mm from the vehicle body.
  • Measurements: 1157mm x 527mm external max. (see diagram, Measurement A)
  • The internal area is 1067mm x 437mm (see diagram, Measurement C).
  • The size of the aperture you need to cut out is 1107mm x 477mm (see diagram, Measurement B).
  • The corner radius of the aperture you need to cut out is 76mm (see diagram).
  • Black powder-coat painted aluminium frame.
  • Includes rubber seal and internal bezel.
  • E43 4mm toughened safety glass.
  • 70% No-Light transmission Dark Tint.
  • Factory prepared tint - not a stuck on film.
  • Easy to fit DIY.
  • Fitting service also available - just call.
  • Price is for one Sun Roof.

Can be fitted to :

  • Land Rovers and other 4x4
  • Other Shooting/Leisure vehicles
  • Trucks with Sleeping Pods
  • Coaches and Lorries
  • Horseboxes
  • Motor Caravans / Motor Home
  • Towed Caravans
  • Porta-cabins / Mobile Buildings / Other Enclosure
  • Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss

DOWNLOAD LINK: Fitting Instructions

Note: These fitting instructions are NOT actually for this specific window but the principles are the same.

Optional extra, purchase below

  • Adhesive and Rivets Kit (UK ONLY SHIPPING) - to affix the side windows (and to save you the hassle of going to the DIY store)

CUSTOMERS OUTSIDE THE UK: Sorry, we cannot ship window adhesive outside the UK due to customs issues, please do not order our Adhesive and Rivets Kit. You will need to source them locally. The Adhesive and Rivets kit below will give you a guide for what you need to source.