Piggy Back Wiring Loom
The Piggy-Back Wiring Loom provides a plug & play solution when you need to supply a separate power feed to additional vehicle lighting in your Land Rover Defender.
Use the piggy back loom for...
-
Providing the sidelight feed to Daytime Running Lights (DRLs)
-
Providing a sidelight feed into aftermarket LED headlamps.
-
Connecting to loading module/resistors on LED indicator/turn signal installs
-
Connect into a reverse lamp to provide a feed for additional rear work lighting or reverse camera feed.
The Piggy-Back Wiring Loom uses the same sealed connectors as those used by Land Rover on the Defender vehicle lamps from 1993 making it suitable for fitting to the majority of Land Rover Defenders.
Simply plug one end of the Piggy-Back Wiring Loom into the back of your lamp and the other end into the original lamp connector on the wiring loom. The positive and negative flyleads can now be used as the supply feed and earth connection for whatever it is you need to provide power to.
The 500mm flyleads on the Piggy-Back Wiring Loom are supplied without the terminals fitted to allow you to easily route the wires through a rubber grommet if necessary.
We provide male and female 2-pin connectors to use on the flyleads to add a professional finish to your installation.
The 2-pin shell connectors are supplied with the compatible male and female crimp terminals. The terminals simply 'click' into the body of the shell connectors.
Land Rover Defender Spare Wheel Carriers – 90 and 110
We design and manufacture the Land Rover Defender Swing Away Spare Wheel Carriers and Land Rover Defender LARGE (heavy duty) Spare Wheel Carriers (for the Defender 90 and 110, replacement part number KTB500040) – may fit other models too – just call. Our Defender Spare Wheel Carriers are chassis mounted rather than door mounted to reduce the strain on the door hinges. Fitting instructions available.
Masai® Land Rover Defender Spare Wheel Carriers are high quality products made of heavy duty steel, with zinc plate and thermoplastic powder coat automotive paint for rust free life. Includes fitting kit and instructions. Our Land Rover Defender Spare Wheel Carrier has special hinged bushes with grease nipples to provide long-life and serviceable parts. The steel is laser-cut with superior clean welding. For Pre 2002 Defender versions of the Large spare wheel carrier a strengthening kit is included, IF requested in the options. The OEM part number is KTB500040.
