Spare Wheel Carriers For Land Rover Defender

We recommend that you change your oil in line with your vehicle's service schedule but for vehicles that only do a low annual mileage then we recommend that the oil is changed at least once per year. The amount of oil needed for a Land Rover Defender varies depending on the specific model and engine type. The table below gives general guidelines regarding the amount of oil required for Land Rover Defenders, but it is important to always check the owner's manual to confirm the exact oil capacity required for your specific Defender model and engine type.


Engine Oil Gear Oil Diff Oil Transfer Box Oil

200TDI

1990-94


6.85 Litres ~ 15W-40 mineral
2.2 Litres ~ 75W-90 GL-4 Front: 2 Litres. Rear 2 Litres
SAE 80W-90 GL-5
2.8 Litres
SAE 80W/90 GL-5.

300TDI

1994-1998


6.85 Litres ~ 15W-40 mineral 2.2 Litres ~ 75W-90 GL-4 Front: 2 Litres, Rear 2 Litres
SAE 80W-90 GL-5
2.8 Litres
SAE 80W/90 GL-5.

TD5

1998-2006


8.2 Litres ~ 10W-40
semi-synthetic
2.2 Litres ~ 75W-90 GL-4 Front: 2 Litres, Rear 2 Litres
SAE 80W-90 GL-5
2.8 Litres
SAE 80W/90 GL-5.

PUMA TDCI

2007-2016


6.3 Litres ~ 5W-30
semi-synthetic
2.2 Litres ~ 75W-90 GL-4 Front: 1.7 Litres, Rear 1.7 Litres
SAE 80W-90 GL-5
2.8 Litres
SAE 75W/90 GL-5.
Refine by
 

Filters

Filters

Land Rover Defender Spare Wheel Carriers – 90 and 110

We design and manufacture the Land Rover Defender Swing Away Spare Wheel Carriers and Land Rover Defender LARGE (heavy duty) Spare Wheel Carriers (for the Defender 90 and 110, replacement part number KTB500040) – may fit other models too – just call. Our Defender Spare Wheel Carriers are chassis mounted rather than door mounted to reduce the strain on the door hinges. Fitting instructions available.

Masai® Land Rover Defender Spare Wheel Carriers are high quality products made of heavy duty steel, with zinc plate and thermoplastic powder coat automotive paint for rust free life. Includes fitting kit and instructions. Our Land Rover Defender Spare Wheel Carrier has special hinged bushes with grease nipples to provide long-life and serviceable parts. The steel is laser-cut with superior clean welding. For Pre 2002 Defender versions of the Large spare wheel carrier a strengthening kit is included, IF requested in the options. The OEM part number is KTB500040.