We sell Land Rover Defender Snorkel Kits (also known as a Raised Air Intake). Snorkels protect engines from the damaging effects of water, dust and sand encountered in touring and off-roading.
Snorkel kit versions for Land Rover Defender 200TDI (left hand fitting kit) and 300TDI, TD5 and TDCI Puma (right hand fitting kit). Snorkel Kits are original Land Rover part number STC50265. For the 300TDI, TD5 and Puma we supply a right-hand bracket.
Roll-cage Snorkel – We also make a Defender Snorkel Kit version for Defenders with roll cages – the lower fitting is different to standard as it protrudes slightly more to accommodate for the position of the roll-cage tubing. The Masai Land Rover Defender Roll Cage Snorkel Kit is available for left hand side 200TDI and right hand 300TDI, TD5 and TDCI Puma.
Outer Sill Rail - One Piece 3mm Aluminium for Land Rover Defender 90 and 110
If your Land Rover Defender's sill panels are worse for wear try these 3mm thick aluminium ONE piece Sill Panels.
The cleats are bonded on using structural adhesive to avoid sink marks on the face of sill panel. They have been CNC pressed, laser cut, welded and dressed off ready to apply paint and fit.
Fixings are included and consists of:
- 8no M6 A4-80 x 25mm Hex Head Bolts
- 4no M6 A4-80 x 30mm Hex Head Bolts
- 4no M6 A4-70 x 25mm Domed Head Cup Sq Bolts
- 28no M6 A4 Flat Washers
- 16no M6 A4-80 Flanged Serrated Nuts
- Please note: A4-80 is the equivalent of Mild Steel 8.8 high tensile bolts
Defender 90 Part Numbers LHS Front RTC6205/Rear MTC8293 & RHS Front RTC6206/Rear MTC8292
Defender 90 Part Numbers LHS Front RTC6205/Rear RTC6210 & RHS Front RTC6206/Rear RTC6209
