We design and manufacture high quality Side Steps and Rear Steps for the Land Rover Defender 90 and 110 – may fit other models too – just call. Folding Side Steps and Rear Steps mounted near towing point.
We also have the Land Rover Defender NAS Rear Step made of zinc plated galvanised steel, black powder coated complete with aluminium tread plate, holes for fitting a towing hook and accommodation for electrical sockets.
Our “Fire and Ice” style Defender Tubular Side Steps feature an attractive “Masai” branded tread plate made of rubber and brushed aluminium. It attaches with bolts and no drilling is required. Clamps to the chassis outriggers. All our steps are easy to fit DIY (instructions supplied).
For touring we designed a Wheel Step which fits most 4×4 wheels – it can be used as a viewing platform, seat or to assist in gaining access to your roof rack and engine. See video above.
Headlining / Roof Lining Kit for Land Rover Defender 110/130 Crew Cab (11pc Kit)
These Masai Headlinings for the Land Rover Defender 110 or 130 Crew Cab are manufactured by highly experienced automotive trimming craftsmen. The shell/body is made of a special GRP which is more rigid and longer-lasting than the orginal Defender lining. The plush suede-effect lining is glued and pressed to the special GRP body in one process at high temperature and under pressure making it both luxuriously good looking and hard wearing.
Optional Extras Note: We highly recommend that you read all about the optional extras below, e.g. matching Sun Visors, A-post finishers, lamps, grab handles, etc.
Crew Cab Note: This product will also fit 130 Crew Cab vehicles with a measurement of 1930mm between the front facia of the front bulkhead and rear of the double cab.
Colour Notes: This product will remain IN STOCK to allow you to order, however there *may* be a 4-6 week lead time. Your chosen colour choice is most likely available right away, in that case you will receive within 2-5 working days after making payment. You're welcome to call us and enquire about which colours we have available now.
This Defender 110/130 Crew Cab Headlining Kit includes:
- Front Piece (Not for Defenders with a sunroof, although a suitable hole can be easily cut out to accommodate)
- Rear Piece
- Seatbelt B-Posts (2x)
- Quarter Light Trims (2x)
- Other Rear Window Trims (5x)
- Fir Tree Clips - to be fitted into the predrilled holes on the headlining for Defender PUMAs, if your Defender is pre 2007, then you will need to make new holes to match the ones in your roof.
- Fir Tree Clip Adhesive Coverings - We supply a sheet of adhesive fabric with cut-outs, that allow you to stick onto the fir trees to match the colour to the headlining. (See photo in the thumbnails above) - These come supplied for ALL 10 different colours!
- Our Defender 110/130 Crew Cab roof linings / headlinings are manufactured by Masai craftsmen; highly experienced in the automotive trimming business.
- All our headlining shells are produced exactly to the Land Rover roof lining shape.
- Made from special GRP, which gives a much better rigidity than the Land Rover thermoplastic biscuit material. This will also provide a much longer lasting roof lining, and will no longer absorb any roof condensation that causes the common problem of sagging over time.
- Our headlinings have a plush suede-like finish for that extra touch of style and is hand glued to each individual roof section.
- Pair of Sun Visors - add new sun visors covered to match your headlining colour choice.
- Pair of Windscreen Finishers/ A-Post Trim Covers - either uncovered or covered to match your headlining colour choice.
- Billet Aluminium Internal A-Post Grab Handle - a high-quality billet aluminium grab handle, easy to fit on to the A-Post. (Black or silver)
- Interior Lamp with Switch Assembly - replace or add interior lights to your headlining, brighten up the interior when needed, fits to the middle of the headlining. The interior lamp fitting and it's bracket will also help secure the roof lining properly.
- Interior Lamp Bracket - to enable you to attach the interior lamp assembly to the headlining
- Alternative LED Bulb for the Interior Lamp - The interior lamp assembly mentioned above comes complete with a filament bulb, so this optional long-life LED bulb will upgrade the lamp.
- Wiring Loom for the Interior Lamp Assembly - to wire-up the optional interior lamp/light
PRODUCT DETAILS
(click to expand and contract)
Masai Headlining Features and Benefits
Optional Extras
We think you may also be interested in these optional extras which you can see below and separately add to your shopping cart. Scroll down to "You May Also Like" section.
FITTING INSTRUCTIONS
(click to expand and contract)
If your existing holes don't match up with our headlining, then you will need to drill additional holes. I'd suggest you drill the holes in the headlining to match your Defender, instead of drilling in the Defender roof to match our headlining. We purposefully covered all the pre-drilled holes with material for this reason. Defenders have changed a lot over the years and Land Rover kept messing with the hole locations!
If you need to cut an aperture for your sunroof, see our video below which shows how we go about undertaking this task.
If you would like some help we offer a fitting service for this product, please call us on 01543 254507 for a quote.
