Side Windows for Land Rover Defender
We manufacture and sell replacement sliding side windows for the Land Rover Defender in pairs – offside and nearside. Clear, green or dark tinted Defender privacy windows. They are standard size replacements – Land Rover part numbers MUC3766 superseded by MWC4734, and MUC3767 superseded by MWC4735, and the kits include a new rubber seal/trim.
Wide Opening Roof Window / Shooting Hatch / Deck Hatch - 810 x 600 mm
- E43 Toughened Glass with Aluminium Frame
- Wide Opening with Gas Struts and Lock
- 70% No-light transmission dark tint
- 810mm x 600mm
Variety of uses where increased access, light and ventilation is needed but not at the expense of security.
Although it is designed for the roof of vehicles it can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.
Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the aperture.
Once you have cut the correct shaped aperture, you will need rivets and sealant to attach the window.
Features
- Measurements: 810mm x 600mm external max
- The aperture that you cut out should be 760mm x 550mm
- The internal area is 720mm x 510mm (see diagram)
- The aperture of the cut out radius needs to be 76mm (see diagram)
- Black powder-coat painted aluminium frame
- 70% no light transmission dark tint to reduce sunlight glare
- E43 4mm toughened glass
- Two gas struts for smooth opening and closing
- Two handle locking, with keys
- If you need it completely wide open the gas strut brackets can be unscrewed from the base (see thumbnail)
- Includes rubber seal and internal bezel
Can be fitted to the roof of:
- Land Rovers and other 4x4
- Other Shooting/Leisure vehicles
- Trucks with Sleeping Pods
- Coaches and Lorries
- Containers/Sheds in Gardens
- Horseboxes
- Motor Caravans / Motor Home
- Towed Caravans
- Mobile Exhibition Trailer
- Porta-cabins / Mobile Buildings / Other Enclosure
- Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss.
Optional extra, purchase below
- Adhesive and Rivets Kit (UK ONLY SHIPPING) - to affix the side windows (and to save you the hassle of going to the DIY store)
CUSTOMERS OUTSIDE THE UK: Sorry, we cannot ship window adhesive outside the UK due to customs issues, please do not order our Adhesive and Rivets Kit. You will need to source them locally. The Adhesive and Rivets kit below will give you a guide for what you need to source.
Our Defender windows have been designed as replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. They are easy to fit if you know a bit about DIY, you will need a drill and a rivet gun. A template is available as an optional extra. The size of the aperture needed is 1057mm x 427mm – which is the Land Rover standard size for Defender rear side windows. Fitting service also available – just call.
We manufacture to original Land Rover quality using original shape Land Rover aluminium profile and locks/catches. Our windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms.
Many old windows rattle, leak and are draughty – our replacement land rover defender windows will solve that – in addition if you order the tinted versions you will be reducing glare and reflecting some of the heat on a hot day. The tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.
