Side Windows for Land Rover Defender
We manufacture and sell replacement sliding side windows for the Land Rover Defender in pairs – offside and nearside. Clear, green or dark tinted Defender privacy windows. They are standard size replacements – Land Rover part numbers MUC3766 superseded by MWC4734, and MUC3767 superseded by MWC4735, and the kits include a new rubber seal/trim.
Masterbond 310ml Window Bonding Adhesive Tube for Bonding Panoramic Windows (UK ONLY)
This listing is for 1 x 310ml tube of 1 hour Masterbond Window Adhesive with a pre-cut nozzle.
We also sell Window Bonding Adhesive and Primer Complete Sets (see below). If you buy a Set, these 310ml tubes of window adhesive can be added as extras, so that you have plenty of tubes of adhesive to finish a large window bonding job.
OVERSEAS CUSTOMERS: Sorry, we cannot ship this window adhesive kit outside the UK due to customs restrictions, please do not order. You will need to locally source a suitable Window Bonding Adhesive and Surface Primer. This adhesive will give you a guide as to what to look for.
Tech specs of Masterbond Window Adhesive
- Density: 1.18 g/cm sq
- Min./max. processing temperature: 5 to 35C
- Min./max. temperature resistance: -40 to +120C
- Drive-away time (with airbag): 1 hour
- Drive-away time (without airbag): 30 min
- Drive-away time conditions: at ambient temperature minus 10C to + 35C
- Max. open time /conditions: 15 min / at 23C and 50% humidity
- Shelf life from production: 12 Months
- Also suitable for use on aluminium, magnesium and hybrid vehicle bodies
Instructions
Ensure that the material is applied in a clean working environment. It is essential to use this window adhesive with a surface primer to ensure correct and faultless work. The work instructions provided with the product must be followed during application.
Our Defender windows have been designed as replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. They are easy to fit if you know a bit about DIY, you will need a drill and a rivet gun. A template is available as an optional extra. The size of the aperture needed is 1057mm x 427mm – which is the Land Rover standard size for Defender rear side windows. Fitting service also available – just call.
We manufacture to original Land Rover quality using original shape Land Rover aluminium profile and locks/catches. Our windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms.
Many old windows rattle, leak and are draughty – our replacement land rover defender windows will solve that – in addition if you order the tinted versions you will be reducing glare and reflecting some of the heat on a hot day. The tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.
