Side Windows for Land Rover Defender
We manufacture and sell replacement sliding side windows for the Land Rover Defender in pairs – offside and nearside. Clear, green or dark tinted Defender privacy windows. They are standard size replacements – Land Rover part numbers MUC3766 superseded by MWC4734, and MUC3767 superseded by MWC4735, and the kits include a new rubber seal/trim.
Masai Zeppelin Dark-Tinted Bonded Side Windows for Land Rover Defender 90 / 110 (slide-opening or fixed) - pair
A Masai flagship product and similar to the original Masai Panoramic Defender Bonded Side Windows only there is less glass and the corners are rounded. We've also designed matching Masai Zeppelin round-cornered quarter light windows, you can purchase those below.
- There are two versions of of our Masai Zeppelin Side Windows - Locking slide-opening side windows OR fixed non-opening side windows (select which you prefer above).
- Both slide-opening and fixed Zeppelin side windows have a black powder-coated aluminium frame attached, which sits in the window aperture in the side of your Defender.
- The radius curves of this Zeppelin window's internal frame are all 50 degrees. See our aperture guide in the thumbnails. If you have a post 2004/05 Defender with Land Rover windows fitted, they have a 50/70 radius aperture, you will need to slightly trim the bottom two curves to be 50 degrees to fit.
- This kit includes: a pair of Zeppelin side windows with internal aluminium frames, a paper template to cut out window apertures (side and quarters) and a fitting instructions booklet. Note: Adhesive and Primer Set is an optional extra (UK ONLY SHIPPING)
- 70% no-light transmission factory-prepared privacy tint reflects heat and reduces glare.
- Beautiful, Minimalist, Durable - increase resale value of your Defender
- Greater Privacy and Security - no leaks, rattles & draughts.
- The price is for a PAIR - offside and nearside.
- Innovative and exclusive, future-proof design.
- E43R approved 4mm toughened safety glass.
- European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE.
- Premium build quality.
- Fitted in just a few hours DIY.
- Fits all Land Rover Defenders, if you have another type of vehicle just call and we can discuss.
- Use to replace standard Land Rover Defender side windows, part numbers: MUC3766 superseded by MWC4734, MUC3767 superseded by MWC4735.
Optional Extras
We think you may also be interested in these optional extras which you can see below and separately add to your shopping cart. Scroll down to "You May Also Like" section.
- 620ml Window Bonding Adhesive Complete Set (UK ONLY SHIPPING) - this kit includes TWO 310ml window adhesive tubes, a cleaning wipe, surface primer, applicator and instructions.
- Matching Masai Zeppelin Quarter Light Windows (pair) - you will also need an additional 310ml Window bonding adhesive set to fit these.
- Rear Door Glass - variants : Masai Panoramic, Pre-2002 and Post-2002
- Internal Window Trims - variants: Masai trims with suede-effect covering or standard uncovered plastic trims.
- Internal Window Trim Finisher Posts - if you're also buying the above internal window trims. Variants: Masai Finisher Posts with suede-effect covering or standard uncovered plastic.
If you're also purchasing Rear Door Glass then these optional extras may be of interest:
- Pair of studs - to fit high-level brake light.
- Rear High-Level Brake Light - Masai slimline LED or standard 3-colour LED.
OVERSEAS CUSTOMERS: Sorry, we cannot ship window adhesive outside the UK due to customs restrictions, please do not order. You will need to locally source a suitable Window Bonding Adhesive and Surface Primer. The Adhesive set below will give you a guide as to what to look for.
Our Defender windows have been designed as replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. They are easy to fit if you know a bit about DIY, you will need a drill and a rivet gun. A template is available as an optional extra. The size of the aperture needed is 1057mm x 427mm – which is the Land Rover standard size for Defender rear side windows. Fitting service also available – just call.
We manufacture to original Land Rover quality using original shape Land Rover aluminium profile and locks/catches. Our windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms.
Many old windows rattle, leak and are draughty – our replacement land rover defender windows will solve that – in addition if you order the tinted versions you will be reducing glare and reflecting some of the heat on a hot day. The tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.
