Side Windows for Land Rover Defender
We manufacture and sell replacement sliding side windows for the Land Rover Defender in pairs – offside and nearside. Clear, green or dark tinted Defender privacy windows. They are standard size replacements – Land Rover part numbers MUC3766 superseded by MWC4734, and MUC3767 superseded by MWC4735, and the kits include a new rubber seal/trim.
Rear Door Glass - Dark Tinted and Heated for Post 02' Land Rover Defenders 90/110 - (Sealed in)
This rear door glass is for Post 2002 rear doors for Land Rover Defenders. (Original Part Number: LR042729). You fit it with a rubber seal (optional extra below). Either re-use your old seal or purchase a new seal. This comes in 2 versions, one with the screen printing for the High-Level Brake light and one without.
- Standard size replacement. (Original Part Number: LR042729)
- High-quality Masai product.
- 4mm toughened (tempered) safety glass E43R, 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
- 70% no light transmission high quality factory-prepared dark tint, NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
- Heat reflecting coating, glare reduction glass.
FITTING NOTES
Carefully remove rear door glass without damaging the rubber - as you may want to re-use it (although you can buy a new seal in this product's options). Carefully remove brake light from old glass as you will need to glue it to the new glass.
Optional Extras
We think you may also be interested in these optional extras which you can see below and separately add to your shopping cart. Scroll down to "You May Also Like" section.
- Rear Door Glazing Seal - for Post 2002 Defenders only (Land Rover part number CVW500010).
- Pair of studs - to fit high-level brake lights
- Rear High-Level LED Brake Light - slimline, standard or 3-colour.
- Matching quarter light windows
- Quarter light seals - if you add quarter light windows
Our Defender windows have been designed as replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. They are easy to fit if you know a bit about DIY, you will need a drill and a rivet gun. A template is available as an optional extra. The size of the aperture needed is 1057mm x 427mm – which is the Land Rover standard size for Defender rear side windows. Fitting service also available – just call.
We manufacture to original Land Rover quality using original shape Land Rover aluminium profile and locks/catches. Our windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms.
Many old windows rattle, leak and are draughty – our replacement land rover defender windows will solve that – in addition if you order the tinted versions you will be reducing glare and reflecting some of the heat on a hot day. The tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.
