Side Windows for Land Rover Defender
We manufacture and sell replacement sliding side windows for the Land Rover Defender in pairs – offside and nearside. Clear, green or dark tinted Defender privacy windows. They are standard size replacements – Land Rover part numbers MUC3766 superseded by MWC4734, and MUC3767 superseded by MWC4735, and the kits include a new rubber seal/trim.
Living Area Horsebox Windows
We design and manufacture tinted bonded windows for luxury horseboxes or horse lorries/wagons/trucks
Our range of horsebox windows suitable for the living area includes the following:
- PAN720x513F - Dimensions 720mm x 513 Fixed Blackout
- PAN720x513S - Dimensions 720mm x 513 Sliding - Aperture 605mm x 423mm
- PAN1320x513F - Dimensions: 1320mm x 513mm Fixed
- PAN1320x513S - Dimensions: 1320mm x 513mm Sliding
- PAN1420x513F - Dimensions: 1420mm x 513mm Fixed
- PAN1420x513S - Dimensions: 1420mm x 513mm Sliding
Fitting Note: When installing sliding windows, please make sure that the sliding section of the glass is pointing to the rear of the vehicle for correct installation.
Our bonded tinted windows are reversible (can be used on either the left or right hand side of the vehicle) and have a 70% Dark-tint that reduces glare and heat.
- Teardrop Set 1 - Includes 4 pieces of glass.
NS/ 11-08-25 - Dimensions: 864mm x 609mm
NS/ 11-08-24 - Dimensions: 864mm x 609mm
OS/ 11-08-25 - Dimensions: 864mm x 609mm
OS/ 11-08-24 - Dimensions: 864mm x 609mm
- Teardrop Set 2 - Includes 4 pieces of glass.
NS/ 11-08-16 - Dimensions: 965mm x 609mm
OS/ 11-08-15 - Dimensions: 965mm x 609mm
OS/ 11-08-16 - Dimensions: 965mm x 609mm
NS/ 11-08-15 - Dimensions: 965mm x 609mm
All Masai Omega Automotive/ Horsebox Glass have the following features:
- Beautiful, sleek and innovative future-proof designs
- Factory prepared tints (built in tint, not a film) reflect heat and reduce glare
- E43R approved 4mm toughened safety glass
- We polish all glass edges for extra safety
- Leak proof, draft proof
- High quality rubber seals to keep drafts and rain out - frames tested for water leakage
- Our drainage holes are rectangular - circular holes would force water in when vehicle is moving
- Premium quality flock lining to ensure the glass slides smoothly
- Durable and attractive high quality button locks / lever catch mechanisms
- All screws and components are silicon covered to avoid water ingress
- Silicone adhesive we recommend has a heat tolerance of minus 40 to plus 90 degrees C
Our Defender windows have been designed as replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. They are easy to fit if you know a bit about DIY, you will need a drill and a rivet gun. A template is available as an optional extra. The size of the aperture needed is 1057mm x 427mm – which is the Land Rover standard size for Defender rear side windows. Fitting service also available – just call.
We manufacture to original Land Rover quality using original shape Land Rover aluminium profile and locks/catches. Our windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms.
Many old windows rattle, leak and are draughty – our replacement land rover defender windows will solve that – in addition if you order the tinted versions you will be reducing glare and reflecting some of the heat on a hot day. The tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.
