Side Windows for Land Rover Defender
We manufacture and sell replacement sliding side windows for the Land Rover Defender in pairs – offside and nearside. Clear, green or dark tinted Defender privacy windows. They are standard size replacements – Land Rover part numbers MUC3766 superseded by MWC4734, and MUC3767 superseded by MWC4735, and the kits include a new rubber seal/trim.
Masai Front Door Glass for Land Rover Defender 90, 110 and 130 - NS and OS.
Our Defender front door glass is sold as a pair - nearside and offside (LH and RH), and available in three tint variations (standard LR is either 5% green or clear).
- 5% green tinted glass (5% no-light transmission factory-prepared tint)
- 15% galaxy grey tinted glass (15% no-light transmission factory-prepared tint)
- 65% extra dark tinted glass (65% no-light transmission factory-prepared tint) (PLEASE NOTE: These 65% dark front side windows are illegal under UK legislation, as you're only allowed up to 30% tint. If you reside outside of the UK, please check your country's/state law regarding tinted front door windows.)
- Factory-prepared tint, NOT a glued-on film.
- E43R approved 4mm toughened safety glass. European Commission Directive 2001/92/EC, regulation No. 43 of the UN/ECE.
- Premium build quality. Polished edges.
- DIY fitting - in 2-3 hours. Fitting Service available - just call us.
Land Rover OE Part Numbers:
ALR4773 Clear RH side, ALR4771 Clear LH side, ALR4774 Grey Tint RH side, ALR4772 Grey Tint LH side
Optional Extras
We think you may also be interested in these optional extras which you can see below and separately add to your shopping cart. Scroll down to "You May Also Like" section.
- Window Clip Glass Holders (pack of 4) - they connect the mechanism to the glass) OEM part number is STC4787.
- Adhesive - to attach glass to glass holder clips
Our Defender windows have been designed as replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. They are easy to fit if you know a bit about DIY, you will need a drill and a rivet gun. A template is available as an optional extra. The size of the aperture needed is 1057mm x 427mm – which is the Land Rover standard size for Defender rear side windows. Fitting service also available – just call.
We manufacture to original Land Rover quality using original shape Land Rover aluminium profile and locks/catches. Our windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms.
Many old windows rattle, leak and are draughty – our replacement land rover defender windows will solve that – in addition if you order the tinted versions you will be reducing glare and reflecting some of the heat on a hot day. The tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.
