Side Windows for Land Rover Defender
We manufacture and sell replacement sliding side windows for the Land Rover Defender in pairs – offside and nearside. Clear, green or dark tinted Defender privacy windows. They are standard size replacements – Land Rover part numbers MUC3766 superseded by MWC4734, and MUC3767 superseded by MWC4735, and the kits include a new rubber seal/trim.
Dark Tint Camper-Style Rear Window for Defender Crew Cab - 963mm x 419mm.
Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the Defender Crew Cab Rear Window aperture.
Once you have cut the correct shaped aperture, you will need rivets and adhesive sealant to attach this Window.
If you need the Crew Cab Rear Window completely wide open the gas strut brackets can be unscrewed from the frame.
The Crew Cab Rear Window can also be used on the roof of a vehicle as a sunroof, in this case the drain holes must be blocked with sealant.
- SOLD as SINGLE WINDOWS (Price is NOT for a pair).
- Includes two Gas Struts for smooth opening and closing.
- Includes rubber seal and internal bezel.
- Two handle locking with keys.
- The maximum amount the Crew Cab Rear Windows will open is as seen in the above photo and is 200mm from the vehicle body.
- Measurements: 963mm x 419mm external max.
- The size of the aperture needed is 913mm x 369mm.
- The Radius of the cut out aperture needs to be 76mm.
- Black powder-coat painted aluminium frame.
- Made to original Land Rover quality - BUT they do not rattle or leak.
- E43 4mm toughened safety glass.
- 70% No-Light transmission Dark Tint.
- Factory prepared tint - not a stuck on film.
- Easy to fit DIY.
- Fitting service also available - just call.
The Crew Cab Rear Window can be fitted to:
- Land Rovers and other 4x4
- Other Shooting/Leisure vehicles
- Trucks with Sleeping Pods
- Coaches and Lorries
- Containers/Sheds in Gardens
- Horseboxes
- Motor Caravans / Motor Home
- Towed Caravans
- Mobile Exhibition Trailer
- Porta-cabins / Mobile Buildings / Other Enclosure
- Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss
See: Masai Defender side windows Fitting Instructions
These fitting instructions are NOT actually for this specific rear window but the principles are the same. Be very careful to cut the exact shape aperture needed.
Optional extra, purchase below
- Adhesive and Rivets Kit (UK ONLY SHIPPING) - to affix the window (and to save you the hassle of going to the DIY store)
CUSTOMERS OUTSIDE THE UK: Sorry, we cannot ship window adhesive outside the UK due to customs issues, please do not order our Adhesive and Rivets Kit. You will need to source them locally. The Adhesive and Rivets kit below will give you a guide for what you need to source.
Our Defender windows have been designed as replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. They are easy to fit if you know a bit about DIY, you will need a drill and a rivet gun. A template is available as an optional extra. The size of the aperture needed is 1057mm x 427mm – which is the Land Rover standard size for Defender rear side windows. Fitting service also available – just call.
We manufacture to original Land Rover quality using original shape Land Rover aluminium profile and locks/catches. Our windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms.
Many old windows rattle, leak and are draughty – our replacement land rover defender windows will solve that – in addition if you order the tinted versions you will be reducing glare and reflecting some of the heat on a hot day. The tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.
