Side Windows for Land Rover Defender
We manufacture and sell replacement sliding side windows for the Land Rover Defender in pairs – offside and nearside. Clear, green or dark tinted Defender privacy windows. They are standard size replacements – Land Rover part numbers MUC3766 superseded by MWC4734, and MUC3767 superseded by MWC4735, and the kits include a new rubber seal/trim.
ARB Awning with LED light - 2000mm (W) x 2500 (L) for Defender 90
Easy to mount and operate, these self-standing, retractable awnings with LED light are suitable for the Land Rover Defender 90. They fit onto the side of a roof rack, and are conveniently stored for immediate use on arrival. Specifically designed to tolerate all conditions including harsh outback conditions, these ARB awnings feature height adjustable, telescopic legs and provide fast and convenient protection from the elements.
Easily mounted to the side of most roof racks or roof bars, the ARB awning is secured in a heavy duty nylon reinforced PVC bag. Constructed from tough PU coated 300gsm poly/cotton rip stop canvas, the awnings are fully waterproof and offer a UVP 50+ rating.
When touring or camping, having adequate lighting is one of the most important items needed for any trip. Having good bright light, in the right spot and not in your eyes, will further enhance your overnight experience in the great outdoors. Just like in your home, good quality lighting is in the ceiling, not the walls - therefore placing the light right where it's needed and not harshly in your eyes is important.
The slim dimensions of the LED light strip simplifies pack up. The light can be rolled up with the awning roof after use and not removed, keeping everything together for your next adventure (make sure the joining cable hangs out about 10cm from the sleeve). The ARB awning light provides up to 1200 lumens with a choice of either cool white or amber colour mode and is dimmable via a waterproof digital dimmer switch. Building a high performance light into the roof came with some challenges. One was making sure we could get the LED strip small enough as well as making sure we could keep them cool so they would not de-rate and dim prematurely. This has been achieved by using quality LED chips that can handle more heat than a standard strip light and also attaching the strip light to an aluminium track for heat dissipation, all sealed in a water tight resin.
Colour feature: Amber mode provides low bug attractant qualities or to provide comfortable late-night soft lighting when out camping or touring with current draw at 1 amp hour. The light is powered via a fused cigarette lighter plug, with an additional 4 meters of insulated water proof cable and connectors, so the Awning with Light can be mounted on either side of your vehicle. Included with the wiring is a handy storage bag to keep all your cables together when the light is not in use. Assembling the light in the awning is a simple job and is best done once the awning is mounted to the vehicle and has been set up in its erect state.
Full instructions are included with the awning to setup the light. Once the awning has been attached to the vehicle and erected you will notice the clear sleeve down the centre of the awning with openings at either end to insert the strip light and remain for the rest of the awning's life, this is only required to be done once.
Features and Benefits
- 300gsm Awning roof material - Heavy duty to withstand the elements, mould proof treated, provides excellent UV reduction, one of the highest in class
- 1000mm water head rating - Excellent water proofing
- 25mm aluminium poles and arms @ 1.2mm thickness
- Superior strength and one of the thickest in the market
- 1000D PVC carry bag
- Excellent abrasion and UV rating
- Welded and heat tape seamed seams
- Quality built
- Flexible arm joints - reduce stress and cracking
- 1200 lumen, high heat resistant LEDs with aluminium extrusion for heat dissipation
- Water resistant digital dimmer control - dimmer rated to IP56
- Cool white LED mode - great for cooking and preparation
- Amber LED mode - great to reduce bugs and mood lighting
- Once light is mounted, packs away with awning easily every time
- Additional cable storage bag provided for when not in use
NOTE:
- This awning does not come with mounting brackets, please purchase them below.
Optional Extras
We think you may also be interested in these optional extras which you can see below and separately add to your shopping cart. Scroll down to "You May Also Like" section.
- Awning Mounting Brackets
- Front Windbreak 2000mm
- Side Windbreak 2400mm
- ARB Simpson III Roof Tent with Annex
Our Defender windows have been designed as replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. They are easy to fit if you know a bit about DIY, you will need a drill and a rivet gun. A template is available as an optional extra. The size of the aperture needed is 1057mm x 427mm – which is the Land Rover standard size for Defender rear side windows. Fitting service also available – just call.
We manufacture to original Land Rover quality using original shape Land Rover aluminium profile and locks/catches. Our windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms.
Many old windows rattle, leak and are draughty – our replacement land rover defender windows will solve that – in addition if you order the tinted versions you will be reducing glare and reflecting some of the heat on a hot day. The tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.
