Sun Roof / Shooting Hatch / Wide Opening Roof Windows

Vehicle Sun Roof / Wide Opening Roof Window / Vent / Shooting Hatch / Deck Hatch – use where increased access, light and ventilation is needed but not at the expense of security.

Our vehicle Roof windows feature E43 Toughened Glass with Aluminium Frame, they are Wide Opening with Gas Struts and Lock, 70% No-light transmission dark tint. Although designed for the roof of vehicles they can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.

XJS and XJ6 Jaguar Water Pump - EBC8550 (includes backplate)

SKU: EBC8550
£138.00
Sold out
Price Includes 20% VAT (20%) £23.00
Save this product for later
Have questions?
Share this product with your friends
XJS and XJ6 Jaguar Water Pump - EBC8550 (includes backplate)
Product Details
OEM Part No: EBC8550
Application: 1988-1992 XJ6 & 4.0 Litre XJS up to engine number 163522
Suitable Vehicle: Jaguar XJ6 and XJS/XJ40

XJS and XJ6 Jaguar Water Pump - EBC8550 (includes backplate)

  • This is a Jaguar Water Pump - Part No. EBC8550
  • Complete with Gasket (Part No. EBC9220)
  • Incorporating the 4-Vee Pulley (Part No. EAC6651)
  • Applications: 1988-1992 XJ6 & 4.0 Litre XJS up to engine number 163522

This is the genuine Jaguar Original Equipment pump. This means that the pump components have been made to original Jaguar drawings and conform with all material and dimensional specifications. All castings are leak-tested prior to final assembly. The components are assembled to specification (exacting tolerances determined by Jaguar) e.g. pulleys are assembled to the correct height to minimise drive belt wear. Impellers are assembled to the correct height to ensure optimum performance and avoid a potentially disastrous foul condition. Bearings and seals are designed to withstand loads and forces prescribed by Jaguar as a result of exhaustive testing under extreme conditions. Assembly processes use load-monitoring to ensure components will not fail prematurely.

The life of a replacement OEM pump can, however, be adversely affected if the car's cooling system is not maintained. Before fitting a replacement pump, it is highly advisable to flush the cooling system under pressure, to clear accumulated debris within the system which can damage the pump if circulated. After the replacement pump has been fitted, the cooling system should be topped up to the correct level with the prescribed proportion of anti-freeze added. Anti-freeze is essential under all temperature conditions as it contains properties which lubricate the water pump seal. Not only does it prevent the coolant from freezing in extreme cold conditions, but it prevents the coolant from boiling in extreme heat.