Vehicle Sun Roof / Wide Opening Roof Window / Vent / Shooting Hatch / Deck Hatch – use where increased access, light and ventilation is needed but not at the expense of security.
Our vehicle Roof windows feature E43 Toughened Glass with Aluminium Frame, they are Wide Opening with Gas Struts and Lock, 70% No-light transmission dark tint. Although designed for the roof of vehicles they can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.
Windscreen Finisher / A-Post Trim Cover - Land Rover Defender (PAIR)
These black plastic trim pieces are designed to go around the windscreen as a finishing trim. These parts are designed to replace genuine Land Rover part numbers MWC2314 and MTC 5212.
As an alternative to these uncovered A-Post trim pieces, we also offer a Masai covered version of this A-post to match our headlinings, sun visors and internal window trim products.
Fitting Instructions for Windscreen Finisher/ A-Post Trim Cover
Simply unscrew your existing trim cover and replace with your new trim cover. When screwing your new trims in place be careful to ensure the wiring and rear windscreen washer pipe that run under the trim are safely in place and not impinged. It is recommended to use a hand screw driver for securing in place. DO NOT USE AN IMPACT DRIVER as this may damage the trim cover.
