Sun Roof / Shooting Hatch / Wide Opening Roof Windows

Vehicle Sun Roof / Wide Opening Roof Window / Vent / Shooting Hatch / Deck Hatch – use where increased access, light and ventilation is needed but not at the expense of security.

Our vehicle Roof windows feature E43 Toughened Glass with Aluminium Frame, they are Wide Opening with Gas Struts and Lock, 70% No-light transmission dark tint. Although designed for the roof of vehicles they can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.

Replacement Rear Door Card/Trim for Defender 90/110 (Pre 2002) with Net Pocket

SKU: RDC-DPRE02-BLK
£129.00
Sold out
Price Includes 20% VAT (20%) £21.50
Colour
Save this product for later
Have questions?
Share this product with your friends
Replacement Rear Door Card/Trim for Defender 90/110 (Pre 2002) with Net Pocket
Product Details
Suitable Vehicle: Defender 90/110 (Pre 2002 ONLY)
Sold As: Rear Door Card Replacment with Fittings
Colour: Grey / Black

Replacement Rear Door Card/Trim for Defender 90/110 (Pre 2002)

The rear door trim panel on Pre 2002 Defenders has long been the weak spot of any Land Rover interior. Until now the only replacement option has been the less than durable genuine trim made of vinyl covered hardboard, industrial looking chequer-plate or a home made plywood replacement. This replacement rear door card is the first real 'factory style' alternative that is both durable and aesthetically pleasing.

This door card will also fit Series vehicles with some minor trimming.

The net included measures 410mm x 200mm and uses top quality close weave elasticised mesh netting.

This can be fitted by any competent DIY'er and requires no specialist tools. Due to Land Rovers less than perfect build tolerances there is some minor trimming of the plastic required.

This kit will contain the following as shown in photo above:

  • 1 x Rear Door Trim Panel
  • 1 x Storage Net and 5 x fixing hole plugs.
  • 2 x Long angled fixing brackets
  • 2 x Short Angled fixing brackets
  • 2 x Grab Handle fixing bolts and 2 x washers
  • 15 x Self tapping screws
  • 12 x Plastic screw/rivets