Vehicle Sun Roof / Wide Opening Roof Window / Vent / Shooting Hatch / Deck Hatch – use where increased access, light and ventilation is needed but not at the expense of security.
Our vehicle Roof windows feature E43 Toughened Glass with Aluminium Frame, they are Wide Opening with Gas Struts and Lock, 70% No-light transmission dark tint. Although designed for the roof of vehicles they can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.
Rear High Level LED Brake Light Assembly Kit for Defender 90/110 - 3 Colours
This high-level LED brake light kit fits to your rear door glass window.
If you do not have your old high level brake light to use the blue bulb holder, you will need to cut the connector on the back of the LED assembly, and extend the wiring. Then fit spade connectors on the ends to connect directly to the rear door glass.
The studs are manufactured by Masai, and are an improved design over Land Rover studs, made from non-conductive ABS to bond to the rear door glass more efficiently.
This kit includes Land Rover parts and numbers:
- LR044451LEDR / LR044451LEDW / LR044451LEDB (Aftermarket)
- XFK100290 Cover (Genuine Land Rover Part)
- LR040907 Rubber Adaptor (Aftermarket)
- AWR4647 Studs (Manufactured by Masai)
- NY105041L Lock Nuts
- BTR2940 Screws (Not pictured)
- Glue kit (Epoxy Resin Glue) for studs to rear door glass
This rear brake light kit can be fitted to all post-2002 Land Rover Defenders unless you have an aftermarket rear door glass that supports a high level brake light.
You can also fit to pre-2002 vehicles if you also buy our Masai rear heated glass.
