Vehicle Sun Roof / Wide Opening Roof Window / Vent / Shooting Hatch / Deck Hatch – use where increased access, light and ventilation is needed but not at the expense of security.
Our vehicle Roof windows feature E43 Toughened Glass with Aluminium Frame, they are Wide Opening with Gas Struts and Lock, 70% No-light transmission dark tint. Although designed for the roof of vehicles they can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.
Nudge Bar (A-Bar / A-Frame) for Off-roading Land Rover Defenders
NOTE: This nudge bar has been designed to fit Air Con and Non Air Con vehicles without further modification and slimline lights, however some front grilles (such as the SVX style grille) require the extension brackets for which will give an addition 50mm of clearance. Additionally, if you going to be fitting large depth lights (such as HID lights) you will need the light extension brackets. Both of these two sets of optional brackets, are can be separately added to your cart (see section lower down this page).
- NOTE: Nudge Bars / A-Bars are for Off-road use only - remove when on the public highway.
- Suitable for Land Rover Defender 90 and 110 models.
- Fits on top of the existing bumper fixing points.
- Bumper not included as shown in photos.
- Highest quality tubular steel 2.5" (60 mm) diameter.
- Zinc plated for long life rust protection and black powder coated.
- It has front brackets with eyelets for mounting lights.
Dimensions when fitted:
- Length: 790mm
- Height: 430mm
- Bar Thickness: 60mm
- Distance from grille: 110mm
Optional extras, (add them below)
We have the option to add an extension bracket for vehicles with aircon fitted and also another extension bracket for fitting lights to A-Bar where the light unit depth requires additional space. The lighting extension bracket has 12mm holes with 50mm centres.
- Extension Brackets for Air-Con Vehicles
- Lighting Extension Bracket for Nudge Bar
