Vehicle Sun Roof / Wide Opening Roof Window / Vent / Shooting Hatch / Deck Hatch – use where increased access, light and ventilation is needed but not at the expense of security.
Our vehicle Roof windows feature E43 Toughened Glass with Aluminium Frame, they are Wide Opening with Gas Struts and Lock, 70% No-light transmission dark tint. Although designed for the roof of vehicles they can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.
Masterbond 310ml Window Bonding Adhesive Complete Set (UK ONLY)
Included in kit: 1 x Masterbond Window Bonding Adhesive (310ml) with pre-cut nozzle, 1 x surface primer liquid, 1 x sponge applicator, 1 x cleaning wipe, and instructions.
Uses: This 310ml window bonding adhesive set is for fitting either a pair of Masai Panoramic Quarter Glass or Masai Zeppelin Quarter Glass or a Masai Panoramic Rear Door Glass or the Extension Glass Pieces for a 2-door Defender 110.
If you want additional tubes of adhesive to go with your kit, you can purchase them below.
OVERSEAS CUSTOMERS: Sorry, we cannot ship this window adhesive kit outside the UK due to customs restrictions, please do not order. You will need to locally source a suitable Window Bonding Adhesive and Surface Primer. This kit will give you a guide as to what to look for.
Tech specs of Masterbond Window Adhesive
- Density: 1.18 g/cm sq
- Min./max. processing temperature: 5 to 35c
- Min./max. temperature resistance: -40 to +120c
- Drive-away time (with airbag): 1 hour
- Drive-away time (without airbag): 30 min
- Drive-away time conditions: at ambient temperature -10c to 35c
- Max. open time /conditions: 15 min / at 23c and 50% humidity
- Shelf life from production: 12 Month
- Also suitable for use on aluminium, magnesium and hybrid vehicle bodies
Instructions
Ensure that the material is applied in a clean working environment. It is essential to use this window adhesive with a surface primer to ensure correct and faultless work. The work instructions provided with the product must be followed during application.
