Vehicle Sun Roof / Wide Opening Roof Window / Vent / Shooting Hatch / Deck Hatch – use where increased access, light and ventilation is needed but not at the expense of security.
Our vehicle Roof windows feature E43 Toughened Glass with Aluminium Frame, they are Wide Opening with Gas Struts and Lock, 70% No-light transmission dark tint. Although designed for the roof of vehicles they can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.
LED Lights Upgrade for Land Rover Defender 90 / 110 With Flasher Relay, Fog & Reverse Lights
NOTE: In the rare case that you require 2x base plinths for the NAS size lights, let us know.
Measurements: 73mm in diameter (Same as original Land Rover lights), 95mm for Fog and Reverse.
This kit includes:
- 2 Front Sidelights.
- 2 Front Indicator lights.
- 2 Rear Indicator lights.
- 2 Rear Tail/Brake lights.
- 1 Rear Reversing light. (95mm NAS style size)
- 1 Rear Fog light. (95mm NAS style size)
- 1 Speed Adjustable Flasher Relay.
- Stainless steel screws.
Options:
- Clear, smoked or coloured lenses (the LEDs inside will be the correct legal colours).
- Add optional LED License Plate Light (click for details).
Features:
- Designed for all post 1983 Land Rover Defenders.
- E marked (EU approved) and SAE Approved.
- Increased visibility (brighter than standard bulbs).
- Enhances and modernises the look of your Defender.
- Easy to fit DIY. Plug and Play!
- No need for resistors.
- Flash speed adjustable relay, has 4 pins and replaces your existing relay.
- 73mm diameter.
- AMP type connected fitted.
- Multi-voltage 9-33V.
- Waterproof to IP67.
Note: If you are installing these light kits on Pre-TD5 Defenders then you will require an additional plinth for the reverse and fog lights. See Additional extra below.
