Sun Roof / Shooting Hatch / Wide Opening Roof Windows

Vehicle Sun Roof / Wide Opening Roof Window / Vent / Shooting Hatch / Deck Hatch – use where increased access, light and ventilation is needed but not at the expense of security.

Our vehicle Roof windows feature E43 Toughened Glass with Aluminium Frame, they are Wide Opening with Gas Struts and Lock, 70% No-light transmission dark tint. Although designed for the roof of vehicles they can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.

Ignition Barrel and Handle Conversion Kit - One Key Operation for Defender 90/110

SKU: LR077438-KIT
£144.00
Price Includes 20% VAT (20%) £24.00
Version
In stock
1
Save this product for later
Have questions?
Share this product with your friends
Ignition Barrel and Handle Conversion Kit - One Key Operation for Defender 90/110
Product Details

Ignition Barrel and Handle Conversion Kit - One Key Operation for Defender 90 / 110

This is the full Ignition Barrel and Handle Conversion Kit to convert your Land Rover Defender front doors with the later style key and larger diameter locks as fitted to later TD5 and Puma models. This will allow you to use one key to open your two front doors, rear door and start the car.

Suitable Vehicles:

  • Fits all Defenders 1990 onwards (3rd barrel will not fit in Pre 2002 rear door handles, see below.)

This kit contains:

  • 1x Ignition Barrel With 2 Keys
    (Choose Genuine Land Rover or Aftermarket NOTE: Genuine keys have land rover oval logo.)
  • 2x Sheer Bolts for the Ignition Barrel
  • 3x Matching Door Lock Barrels
  • 2x Push Button Door Handles
  • 2x Gasket Sets For The Handles
  • 4x New Bolts For Fitting The Door Handles

This kit is a direct fit for all Defenders after 1990.

So this includes 200tdi 1990-1994, 300tdi 1994-1999 and TD5 1998-2006

This will of course also fit all Puma engines models 2007-2016 but would be a replacement rather than an upgrade.

NOTE: The third lock barrel will not fit pre 2002 rear door handles (as they are too big) so if you want to replace that too, you will need either part number LR031336 (for non central locking handle) or LR031337 (central locking handle)

Please note this is not a direct fit on pre 1990 models which had the NA or TD engines fitted as the connections on the back of the ignition barrel are different. Unless you are experienced with auto wiring.

Options:

  • Aftermarket Ignition Barrel with 2x keys
  • Genuine Land Rover Ignition Barrel with 2x Land Rover styled keys

Part Numbers used in kit:

  • LR077438
  • QRH100030G
  • LR066530
  • LR066528
  • STC617
  • SE105101L