Vehicle Sun Roof / Wide Opening Roof Window / Vent / Shooting Hatch / Deck Hatch – use where increased access, light and ventilation is needed but not at the expense of security.
Our vehicle Roof windows feature E43 Toughened Glass with Aluminium Frame, they are Wide Opening with Gas Struts and Lock, 70% No-light transmission dark tint. Although designed for the roof of vehicles they can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.
Aluminium Roof Light Bar For Defenders 90, 110 and 130.
- Lights not included!
- NOTE: If you have a snorkel already fitted, please check they will fit together. This roof light bar will fit along with a genuine land rover snorkel, or our Masai Snorkel. If you own any other after-market snorkel please check the fitments.
- Roof Light Bar suitable for Land Rover Defender 90 and 110.
- Aerodynamic swept Aluminium profile.
- Black powder coated matt finish.
- 4 adjustable position light mounting brackets.
- Easy to fit DIY, clamp-on system no drilling required.
- 150cm x 25cm x 15cm.
Fitting Tips
The design of this light bar enables 2 methods of fitting. There are two sets of holes in the light bar bracket. A set on the top (for use with method 1) and a set on the bottom (for use with method 2). The 2 sets of holes have not been designed to match with each other..
Method 1
The "clamp-on" systems uses a combination of a rubber block and securing bolts that secures the lightbar in place as the bolts are tightened. Due to the variance in gutter dimensions across different years and models, the rubber block may need to be cut with a Stanley Knife to fit.
Method 2
We recommend in cases where light bars are fitted with heavy lights, that a mechanical solution is applied to secure the light bar in place. This will require using the 2 holes on the bottom section of the light bar and drilling 2 holes into the gutter itself before securing with bolts (Not Supplied).
