Roof Racks For Land Rover Defender
We design and manufacture Roof Racks for the Land Rover Defender 90, 110 and Discovery 1 and 2 series – but they may fit other vehicles too – just call us to discuss. Defender Roof Racks are available in three lengths 1.5m, 2.15m and 2.8m. The steel versions have zinc plating and thermoplastic powder coat paint for long life rust protection. Masai Defender Roof Racks are easy to assemble and are supplied with fitting instructions.
We also designed the Masai Defender Flat Roof Racks in 1.5m, 2.15m and 2.8m for Land Rover Defender 90 and 110 – suitable for folding roof tents. The Masai Luggage Roof Racks have a rail that is too high for folding tents, hence why we designed the Masai Flat Roof Racks for Land Rover Defenders. In Spring 2014 we launched our stylish Masai Tubular Roof Racks for Land Rover Defender 90 and 110, and Aluminium Defender Roof Racks are NEW for 2016.
Outer Sill Rail - One Piece 3mm Aluminium for Land Rover Defender 90 and 110
If your Land Rover Defender's sill panels are worse for wear try these 3mm thick aluminium ONE piece Sill Panels.
The cleats are bonded on using structural adhesive to avoid sink marks on the face of sill panel. They have been CNC pressed, laser cut, welded and dressed off ready to apply paint and fit.
Fixings are included and consists of:
- 8no M6 A4-80 x 25mm Hex Head Bolts
- 4no M6 A4-80 x 30mm Hex Head Bolts
- 4no M6 A4-70 x 25mm Domed Head Cup Sq Bolts
- 28no M6 A4 Flat Washers
- 16no M6 A4-80 Flanged Serrated Nuts
- Please note: A4-80 is the equivalent of Mild Steel 8.8 high tensile bolts
Defender 90 Part Numbers LHS Front RTC6205/Rear MTC8293 & RHS Front RTC6206/Rear MTC8292
Defender 90 Part Numbers LHS Front RTC6205/Rear RTC6210 & RHS Front RTC6206/Rear RTC6209
