Roof Racks For Land Rovers

Roof Racks For Land Rover Defender

We design and manufacture Roof Racks for the Land Rover Defender 90, 110 and Discovery 1 and 2 series – but they may fit other vehicles too – just call us to discuss. Defender Roof Racks are available in three lengths 1.5m, 2.15m and 2.8m. The steel versions have zinc plating and thermoplastic powder coat paint for long life rust protection. Masai Defender Roof Racks are easy to assemble and are supplied with fitting instructions.

We also designed the Masai Defender Flat Roof Racks in 1.5m, 2.15m and 2.8m for Land Rover Defender 90 and 110 – suitable for folding roof tents. The Masai Luggage Roof Racks have a rail that is too high for folding tents, hence why we designed the Masai Flat Roof Racks for Land Rover Defenders. In Spring 2014 we launched our stylish Masai Tubular Roof Racks for Land Rover Defender 90 and 110, and Aluminium Defender Roof Racks are NEW for 2016.

Masai 7mm 3-in-1 Sound Deadening with Foam Insulation Sheet (35cm x 50cm)

SKU: MSD-7x350x500
£14.40
Price Includes 20% VAT (20%) £2.40
2mm black Butyl, 5mm closed cell rubber foam, aluminium foil and adhesive
In stock: 1854 available
1
Save this product for later
Have questions?
Share this product with your friends
Masai 7mm 3-in-1 Sound Deadening with Foam Insulation Sheet (35cm x 50cm)
Product Details

Masai 7mm 3-in-1 Sound Deadening with Foam Insulation Sheet

2mm Butyl + 5mm foam = 7mm total thickness (including aluminium foil sheet)

Sold by the sheet for your flexibility.

These particular sheets are 7mm thick and measure 350mm x 500mm (13.78" x 19.7"), which means 5.7 of these sheets cover one square metre.

Made with 2mm black Butyl, 5mm closed cell rubber foam, aluminium foil and strong adhesive with peel off backing. Soft and flexible.

If you want you can utilise this 7mm sheet and our other sheets in 2mm and 3mm in different parts of your vehicle to suit requirements and budget.

FITTING: Simply clean and degrease the areas to be covered, cut the sheets to the shapes required, peal off the protective sheet and apply in all the various places required to suit your needs. The removable backing sheet includes cutting gridlines. For purely sound-dampening you don't need to cover every square inch, the objective is to cover panel areas that can resonate or rattle.

APPLICATIONS: Ideal for insulating and removing unwanted sound in the roof, doors, footwells, wheel arches, side panels. Also helps with internal moisture control. As it is 7mm thick you may have an issue if trying to fit under certain carpeted areas and in certain areas behind door cards.

Masai Sound Deadening and Insulation sheets provide solutions to multiple issues :

  • Improve the thermal efficiency of your vehicle - so warmer in winter, cooler in summer.
  • Reduce the resonance, rattles, vibration and noise level from outside, i.e. from the road, tyres, exhaust, engine.
  • Improve the sound quality produced by your audio device's speakers.

Fits all kinds of vehicles: cars, trucks, coaches, tractor cabs, buses, caravans, camper vans, etc.

This 7mm 3-in-1 sheet (including foam) is ideal for lining vehicle roofs and doors, but can be used anywhere if clearance allows.

We also sell thinner 2mm and 3mm sheets, if you have certain areas that cannot accommodate 7mm sheet.

For Land Rover Defenders use our guide below for how many sheets you need. These quantities are GUIDANCE ONLY, feel free to order a few more or a few less.

Area to be covered Def 90 Def 110 Crew Cab Single Cab
Roof 18 24 15 8
Front Footwells 6 6 6 7
Rear Footwell - 5 5 -
Seatbox (Inside/Outside) 4 / 5 4 / 5 4 / 5 4 / 5
Front Doors (pair) 4 4 4 4
2nd Row Doors (pair) 4 2 2 4
Rear Door 1 1 - -
Rear Tub (Floor / Arches) 8 / 9 8 / 9 - -
Bulkhead Behind Seats (Front) 5 - 5 (2nd row) 5
Bulkhead Behind Seats (back) 5 2 - -
Bulkhead (Engine Bay)
Rebuilding from scratch
5 for sides
2 for tunnel
5 for sides
2 for tunnel
5 for sides
2 for tunnel
5 for sides
2 for tunnel
Side & Rear Panels (No windows) PER SIDE 5 5 - -
Bonnet 8 8 8 8