These Defender rear windows have been designed as standard size replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. Land Rover Defender rear door glass is easy to fit if you know a bit about DIY. Fitting service also available – just call.
Our Defender rear windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms. The dark tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.
Sun Roof - 1107 x 477 mm - DARK tint for all kinds of vehicles
This Sunroof has a variety of uses where increased access, light and ventilation is needed but not at the expense of security.
Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the aperture.
Once you have cut the correct shaped aperture for the Sun Roof, you will need rivets and sealant to attach the Sun Roof.
Please block the drain holes with silicone sealant when used horizontally on a roof. This Sun Roof can also be used vertically on its side - in which case do not block the drain holes.
If you need the Sun Roof completely wide open the gas strut brackets can be unscrewed from the frame.
PLEASE NOTE: You need to abide by all laws, regulations and standard practices with regard to the fitting and usage of these windows.
- Includes two Gas Struts for smooth opening and closing.
- Two handle locking with keys.
- The maximum amount these windows open is as seen in the above photo and is 200mm from the vehicle body.
- Measurements: 1107mm x 477mm external max.
- The internal area is 1017mm x 387mm (see diagram).
- The size of the aperture you need to cut out is 1057mm x 427mm (see diagram).
- The corner radius of the aperture you need to cut out is 76mm (see diagram).
- Black powder-coat painted aluminium frame.
- Includes rubber seal and internal bezel.
- E43 4mm toughened safety glass.
- 70% No-Light transmission Dark Tint.
- Factory prepared tint - not a stuck on film.
- Easy to fit DIY.
- Fitting service also available - just call.
- Price is for one Sun Roof.
Can be fitted to :
- Land Rovers and other 4x4
- Other Shooting/Leisure vehicles
- Trucks with Sleeping Pods
- Coaches and Lorries
- Horseboxes
- Motor Caravans / Motor Home
- Towed Caravans
- Porta-cabins / Mobile Buildings / Other Enclosure
- Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss
Download ......Fitting Instructions
Note: These fitting instructions are NOT actually for this specific window but the principles are the same.
Optional extra, purchase below
- Adhesive and Rivets Kit (UK ONLY SHIPPING) - to affix the side windows (and to save you the hassle of going to the DIY store)
CUSTOMERS OUTSIDE THE UK: Sorry, we cannot ship window adhesive outside the UK due to customs issues, please do not order our Adhesive and Rivets Kit. You will need to source them locally. The Adhesive and Rivets kit below will give you a guide for what you need to source.
