These Defender rear windows have been designed as standard size replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. Land Rover Defender rear door glass is easy to fit if you know a bit about DIY. Fitting service also available – just call.
Our Defender rear windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms. The dark tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.
Double Din Conversion Console - Defender TD5 (2002-2007)
Two colour options available:
- Matt Black
- Brunel Silver
Suitable Vehicles:
- Defender - 2002-2007 TD5
Corresponds to single - DIN FWJ000110LQV
This TD5 Double DIN Console replaces the factory-fit Defender Td5 radio fascia with an exclusive one-piece design that allows you to easily upgrade the original single DIN radio set-up to a double DIN head unit. The original radio fascia fitted is a fragile unit prone to breakage thanks to a flimsy and poorly designed two-piece assembly that can barely support the weight of the single DIN head unit. Typically, the separate centre panel containing the head unit/radio will break loose from the main console.
Fitting is a simple DIY upgrade that uses the factory fixings and requires no cutting, drilling or modifications to be made to your dashboard. Simply remove your old console, replace with the new console and enjoy the benefits and features of the larger screens found on modern double DIN head units. The console was engineered using CAD 3D scanning technology and uses an injection moulded manufacturing process for a factory fit appearance and a perfect fit every time.
A design detail we've incorporated is to increase the diameter of the recess that houses the standard cigar lighter style 12v socket. This increase in the recess diameter has been made to accommodate the popular Bluesea marine grade power sockets.
FAQ's
Will my X,Y,Z head unit fit this TD5 Console?
When creating the console we discovered that there are variations in the size of double DIN Head units. Whilst single DIN is an industry standard, double DIN is a general term for head units which are roughly double in size. We therefore made the hole slightly smaller than the majority of double DIN head units in order for our console to accommodate as many head units as possible. We advise you take note of the measurements below before purchasing to ensure the console will fit your head unit. The hole can be trimmed in order to fit slightly larger head units. The dimensions of the hole in the Td5 Console are 108mm x 180mm.
Will the Double DIN Console fit the pre-2002 Defender models?
No. The 2002 - 2007 dashboard differs from the pre-2002 model of Defender by using a one-piece dashboard tray/vent panel moulding that the radio console attaches to. Without this (now obsolete) dashboard moulding there is nothing in the earlier Defender to attach the Td5 Double DIN Console to.
My original TD5 Console doesn't have a radio fitted but instead has a large pocket where the radio would go. Can I remove this pocket and fit a Double DIN head unit into the space?
No. The hole in the factory console is not a Double DIN size.
What's in the box?
The Td5 Defender Console comes complete with full colour instructions (Note you will need to re-use the factory fixings and your existing switch retainer.)
