Puma Bonnets for Land Rover Defender
- Suitable for all Defenders from 200tdi to Puma models.
- We have both genuine OEM Land Rover Puma Bonnets made of aluminium (part number BKA710140), and cheaper aftermarket versions – both standard and reinforced.
- The aftermarket version Land Rover Defender Puma Bonnet is made of GRP – Glass Reinforced Plastic with steel fixtures for original fasteners; it is durable and flexible for heavy use. It is light-weight compared to original aluminium Defender bonnets – the net weight is 10KG. Noise transmission is much less than the OEM aluminium version. It will reduce the engine noise.
- NOTE : Both types are unfinished – meaning they require some filling, primer and top coats of paint.
Small Horsebox Windows
We design and manufacture tinted bonded windows and roof hatches for luxury horseboxes or horse lorries/wagons/trucks.
Our range of horsebox windows suitable for smaller horseboxes include the following:
- PAN560x375 - Dimensions 560mm x 375mm - Aperture Dimensions - 455mm x 285mm
- PAN720x513 - Dimensions 720mm x 513mm - Aperture Dimensions - 605mm x 423mm
- PAN1320x513 - Dimensions 1320mm x 513mm - Aperture Dimensions - 1057mm x 427mm
- Zeppelin Side Sliding window - Dimensions 1094mm x 470mm - Aperture Dimension - 1054mm x 440mm
Our bonded tinted windows are reversible and have a 70% Dark-tint that reduces glare and heat.
Fitting Note: When installing sliding windows, please make sure that the sliding section of the glass is pointing to the rear of the vehicle for correct installation.
All Masai Omega Automotive/ Horsebox Glass have the following features:
- Beautiful, sleek and innovative future-proof designs
- Factory prepared tints (built in tint, not a film) reflect heat and reduce glare
- E43R approved 4mm toughened safety glass
- We polish all glass edges for extra safety.
- Leak proof, draft proof.
- High quality rubber seals to keep drafts and rain out - all frames tested for water leakage.
- Our drainage holes are rectangular - unlike circular holes which would force water in when vehicle is moving.
- Premium quality flock lining to ensure the glass slides smoothly
- Durable and attractive high quality button locks / lever catch mechanisms
- All screws and components are silicon covered to avoid water ingress
- Silicone adhesive we recommend has a heat tolerance of minus 40 to plus 90 degrees C
Toughened Glass and Aluminium Roof Hatch / Roof Vent / Roof Light - (500x500 / 970x530)
Roof Hatch designed for 4x4, horse boxes, mobile exhibition trailer, campervan, motor home, coach, lorry, bus or any vehicle, porta-cabin, enclosure, etc - where increased light and ventilation is needed but not at the expense of security. Horsebox roof hatch / vent, trailer roof hatch, coach roof hatch light window, motor home roof light.
- Black powder coated aluminium frame.
- Screen printed with dot fading to reduce sun light glare and reduce heat.
- E43 4mm toughened glass.
- Injection moulded handles.
- Provides ventilation gap back, front or both - by way of a sprung scissor mechanism.
- When closed, the spring mechanism ensures the Roof Vent is fully sealed against the weather.
- Available in 500x500mm and 970x530mm variants.
