Puma Bonnets for Land Rover Defender
- Suitable for all Defenders from 200tdi to Puma models.
- We have both genuine OEM Land Rover Puma Bonnets made of aluminium (part number BKA710140), and cheaper aftermarket versions – both standard and reinforced.
- The aftermarket version Land Rover Defender Puma Bonnet is made of GRP – Glass Reinforced Plastic with steel fixtures for original fasteners; it is durable and flexible for heavy use. It is light-weight compared to original aluminium Defender bonnets – the net weight is 10KG. Noise transmission is much less than the OEM aluminium version. It will reduce the engine noise.
- NOTE : Both types are unfinished – meaning they require some filling, primer and top coats of paint.
Internal Window Trims Kit for Land Rover Defender 90 - 200/300/TD5 (4 Pieces, uncovered)
Spruce up the interior of your Defender 90 - 200/300/TD5 by fitting an internal window trim kit. Including rear side window and quarter light trims - 4 pieces in total - Masai's internal window trim kit covers the bare metal surrounding the rear side windows and quarter lights.
These kits are supplied in a dark grey or black finish to suit most Land Rover interiors but can easily be painted to your requirements.
- Rear side window internal trims AND quarterlight internal trims (4 pieces - see thumbnails)
- Made of high-quality GRP.
- Fixing kit is included.
- DIY installation in under an hour. (Fitting service available.)
- Ideal for replacing worn trim kits or converting a panel-van into a County spec.
- Equivalent to official Land Rover part numbers MWC5832LOY, MWC8910LNP, ENV500170LOY, MWC8911LNP
- Fits all 200/300/Td5 Land Rover Defender 90s from 1985 to 2005 (BUT NOT the recent 70mm lower radius TDCi/Puma windows with forward facing seats).
- Top and bottom corner radius is 50mm.
- For the Defender 110 we can make a bespoke design - call for a quote. (See thumbnails for an example)
Download Internal Trim Fitting Instructions.
We highly recommend this extra:
See "You May Also Like" section below to add any extras to your basket. Please call us if you need advice.
Pair of Internal Window Trims Finisher Posts - please pick a colour
Trims Finisher Posts are highly recommended extras to neaten up the edges and fill the gaps. These window trim finisher posts are available as uncovered plastic or covered in the same material and colours as our internal window trim kits and are available for Defender 90 and 110 models up to 2016.
You may also be interested in these optional extras:
Set of Trim Fitting Spacers for vehicles with Inward Facing Rear Seats
If you have Inward Facing Rear Seats. Spacers enable the safe securing of inward-facing seats through the interior window trim on TD5 model Defenders (1987-2006). Made from black plastic they replace the original metal parts providing support for bolts that secure the seats to the vehicle frame. The support provided by the spacer secures the internal trim and ensures no distortion or wear and tear as the bolts are tightened. The softer plastic material causes less wear and tear to the interior trim and reduces internal vibration. Each interior window trim requires 5 spacers and so this convenient kit enables you to undertake the complete job with minimum fuss.
Station Wagon Conversion Lower Retaining Clips
If your vehicle is NOT a factory station wagon, and you are converting to a station wagon, then you will need these clips to secure the internal window trims. Land Rover part number MXC3276.
Interior LED Vehicle Strip Lights
Enhance and brighten the interior of your vehicle with low power consumption LED strip lights. Various Sizes and Voltages: 245mm long, 400mm long, or 555mm long. We think our internal window trim kits look fantastic paired with a set of these strip lights, which add a bespoke twist to a utilitarian classic.
