Puma Bonnets for Land Rover Defender
- Suitable for all Defenders from 200tdi to Puma models.
- We have both genuine OEM Land Rover Puma Bonnets made of aluminium (part number BKA710140), and cheaper aftermarket versions – both standard and reinforced.
- The aftermarket version Land Rover Defender Puma Bonnet is made of GRP – Glass Reinforced Plastic with steel fixtures for original fasteners; it is durable and flexible for heavy use. It is light-weight compared to original aluminium Defender bonnets – the net weight is 10KG. Noise transmission is much less than the OEM aluminium version. It will reduce the engine noise.
- NOTE : Both types are unfinished – meaning they require some filling, primer and top coats of paint.
Fixed Side Windows for Defender 200TDi/300TDi & TD5 (50/50 radius) - 3 Tints - PAIR
Fixed (non-opening) Side Windows for Defender 200TDi/300TDi and TD5 (50/50 radius) - PAIR
Please Note: These rear side windows fit apertures with 50mm radius bottom corners (pre-2004/5 Defenders), and will NOT fit the new 70mm bottom corner radius window apertures that post-2004/5 Defenders have. If your vehicle is a hardtop and does not currently have rear side windows then our side windows can be fitted irrespective of the year of your vehicle.
- Defender side windows - fixed/non-opening (50/50mm corner radius)
- Includes rubber seal/trim which covers over the rivet heads
- Supplied as a pair - offside and nearside.
- Manufactured by Masai.
- Made to original Land Rover quality - BUT they do not rattle or leak
- Original quality Land Rover aluminium profile
- Standard size replacement for 50mm upper and lower corner radius window apertures.
- E43R toughened safety glass
- Factory prepared tint - not a stuck on film
- Easy to fit DIY
- The size of the aperture needed is 1057mm x 427mm - which is the Land Rover standard size for Defender rear side windows
Download: Masai Defender Side Windows Fitting Instructions
Equivalent and compatible with Land Rover part numbers:
- MUC3766 (50mm) superseded by MWC4734 (70mm)
- MUC3767 (50mm) superseded by MWC4735 (70mm)
Read our article about the best way to locate your side windows here
Optional Extras
We think you may also be interested in these optional extras which you can see below and separately add to your shopping cart. Scroll down to "You May Also Like" section.
- Template to help cut out apertures - needed if you are converting a panel van/hard top
- Adhesive and Rivets Kit (UK ONLY SHIPPING) - to affix the side windows (and to save you the hassle of going to the DIY store)
- Rear heated door glass - (tinted to match) - Pre and post 2002 available
- Rear door glass retainer kit - IF your vehicle has a pre 2002 rear door
- Rear door glazing seal - IF your vehicle has a post 2002 rear door
- Rear quarter glass - (tinted to match) - (use template to cut apertures if needed)
- Rear quarter glass window RUBBER SEALS
- High Level Brake Light Mounting Studs
- High Level Brake Light - Masai Slimline OR Standard Red/Clear OR Standard 3 colour.
CUSTOMERS OUTSIDE THE UK: Sorry, we cannot ship window adhesive outside the UK due to customs issues, please do not order our Adhesive and Rivets Kit. You will need to source them locally. The Adhesive and Rivets kit below will give you a guide for what you need to source.