Puma Bonnets

Puma Bonnets for Land Rover Defender

Puma Bonnet for Land Rover Defender

  • Suitable for all Defenders from 200tdi to Puma models.
  • We have both genuine OEM Land Rover Puma Bonnets made of aluminium (part number BKA710140), and cheaper aftermarket versions – both standard and reinforced.
  • The aftermarket version Land Rover Defender Puma Bonnet is made of GRP – Glass Reinforced Plastic with steel fixtures for original fasteners; it is durable and flexible for heavy use. It is light-weight compared to original aluminium Defender bonnets – the net weight is 10KG. Noise transmission is much less than the OEM aluminium version. It will reduce the engine noise.
  • NOTE : Both types are unfinished – meaning they require some filling, primer and top coats of paint.

810mm x 350mm Camper Style Side Window - 70% Dark Tint

SKU: DEF810x350
£325.00
Price Includes 20% VAT (20%) £54.17
In stock: 4 available
1
Save this product for later
Have questions?
Share this product with your friends
810mm x 350mm Camper Style Side Window - 70% Dark Tint
Product Details

810mm x 350mm Camper-Style Side Window - 70% Dark Tint, for Land Rover Defender and Other Vehicles

Variety of uses where increased access, light and ventilation is needed but not at the expense of security. Use as replacement or as a hard-top conversion.

Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the aperture.

Once you have cut the correct shaped aperture, you will need rivets and silicone sealant to attach the window.

If you need it completely wide open the gas strut brackets can be unscrewed from the frame.

Originally designed for use on the side of a vehicle however, it can also be used on the roof of a vehicle as a sun roof, in this case the drain holes must be blocked with silicone sealant.

  • SOLD as SINGLE WINDOWS (Price is NOT for a pair)
  • Includes two Gas Struts for smooth opening and closing
  • Two handle locking with keys
  • The maximum amount these windows open is as seen in the above photo and is 200mm from the vehicle body.
  • Measurements: 810mm x 350mm external max
  • The size of the aperture you need to cut out is 760mm x 300mm - which is the Land Rover standard size for Defender rear side windows
  • The internal area is 720mm x 260mm (see diagram)
  • The Radius of the cut-out aperture needs to be 76mm (see diagram)
  • Black powder-coat painted aluminium frame
  • Includes rubber seal and internal bezel
  • E43 4mm toughened safety glass
  • 70% No-Light transmission Dark Tint
  • Factory prepared tint - not a stuck on film
  • Easy to fit DIY
  • Fitting service also available - just call

Can be fitted to the side of:

  • Land Rovers and other 4x4
  • Other Shooting/Leisure vehicles
  • Trucks with Sleeping Pods
  • Coaches and Lorries
  • Containers/Sheds in Gardens
  • Horseboxes
  • Motor Caravans / Motor Home
  • Towed Caravans
  • Mobile Exhibition Trailer
  • Porta-cabins / Mobile Buildings / Other Enclosure
  • Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss

Download ......Masai Defender side windows Fitting Instructions

These fitting instructions are NOT actually for this specific window but the principles are the same.

Optional extra, purchase below

  • Adhesive and Rivets Kit (UK ONLY SHIPPING) - to affix the side windows (and to save you the hassle of going to the DIY store)

CUSTOMERS OUTSIDE THE UK: Sorry, we cannot ship window adhesive outside the UK due to customs issues, please do not order our Adhesive and Rivets Kit. You will need to source them locally. The Adhesive and Rivets kit below will give you a guide for what you need to source.