We sell replacement Land Rover Defender front seat covers, middle seat covers, 2nd row, bench seats and rear seat covers. In addition, we also sell replacement Defender seats, seat foam, seat belts, etc. Masai’s Defender seat covers are made of luxury soft vinyl leatherette in various colour choices with a layer of foam. Replace your worn-out, torn and scruffy Land Rover Defender seat covers with Masai seat covers, available for all Defender models.
Find out about our Land Rover Defender Seat Refurbishment Service
Piggy Back Wiring Loom
The Piggy-Back Wiring Loom provides a plug & play solution when you need to supply a separate power feed to additional vehicle lighting in your Land Rover Defender.
Use the piggy back loom for...
-
Providing the sidelight feed to Daytime Running Lights (DRLs)
-
Providing a sidelight feed into aftermarket LED headlamps.
-
Connecting to loading module/resistors on LED indicator/turn signal installs
-
Connect into a reverse lamp to provide a feed for additional rear work lighting or reverse camera feed.
The Piggy-Back Wiring Loom uses the same sealed connectors as those used by Land Rover on the Defender vehicle lamps from 1993 making it suitable for fitting to the majority of Land Rover Defenders.
Simply plug one end of the Piggy-Back Wiring Loom into the back of your lamp and the other end into the original lamp connector on the wiring loom. The positive and negative flyleads can now be used as the supply feed and earth connection for whatever it is you need to provide power to.
The 500mm flyleads on the Piggy-Back Wiring Loom are supplied without the terminals fitted to allow you to easily route the wires through a rubber grommet if necessary.
We provide male and female 2-pin connectors to use on the flyleads to add a professional finish to your installation.
The 2-pin shell connectors are supplied with the compatible male and female crimp terminals. The terminals simply 'click' into the body of the shell connectors.
