We sell replacement Land Rover Defender front seat covers, middle seat covers, 2nd row, bench seats and rear seat covers. In addition, we also sell replacement Defender seats, seat foam, seat belts, etc. Masai’s Defender seat covers are made of luxury soft vinyl leatherette in various colour choices with a layer of foam. Replace your worn-out, torn and scruffy Land Rover Defender seat covers with Masai seat covers, available for all Defender models.
Find out about our Land Rover Defender Seat Refurbishment Service
Masai Panoramic Tinted & Heated Rear Door Glass for Land Rover Defender 90 / 110
- Designed to match our Masai Panoramic side windows and quarter lights.
- INCLUDED WITH THE GLASS: a plastic shim for the rear wiper blade hole and a rubber infill seal to fit around the inside of the door window aperture (purely cosmetic). NOTE: This seal is different for pre and post-2002 rear doors, so please tell us accurately which you have.
- A high-quality window manufactured by Masai.
- It is bonded to the vehicle with automotive adhesive.
- 4mm toughened (tempered) safety glass E43R, 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
- 70% no light transmission high quality factory-prepared dark tint NOT an attached film which can be scratched or peeled off. Appears grey with a hint of green.
- Heat reflecting coating, glare reduction glass.
FITTING NOTE : Carefully remove your brake light from your existing rear glass, as you will need to glue it to the new glass. Or you could buy a new brake light below.
Optional Extras
We think you may also be interested in these optional extras which you can see below and separately add to your shopping cart. Scroll down to "You May Also Like" section.
- 310ml Window Bonding Adhesive Complete Set (UK ONLY) - this kit includes one 310ml window adhesive tube, a cleaning wipe, surface primer, an applicator and instructions.
- Pair of studs - to fit high-level brake lights.
- Rear High-Level LED Brake Light Assembly - slimline or standard (if you are not reusing your existing brake light).
- Matching Panoramic quarter light windows - you will need an additional 310ml Window Bonding Adhesive Set if you also purchase quarter lights.
- Matching Panoramic Side Windows (pair) - variants: Fixed/Slide-opening & 90/110 (you will also need the 620ml Window Adhesive Set to attach Panoramic side windows)
OVERSEAS CUSTOMERS: Sorry, we cannot ship window adhesive outside the UK due to customs restrictions, please do not order. You will need to locally source a suitable Window Bonding Adhesive and Surface Primer. The Adhesive set below will give you a guide as to what to look for.
