Defender Chequer Plate for Bonnet, Wing-top and Side Sill
3mm thick aluminium Chequer Plate for Land Rover Defenders 90 and 110. High-quality Defender chequer plate with raised 5 bar pattern. We have Land Rover Defender 3mm aluminium side sill protectors and Puma Bonnet chequer plate in two styles – one piece and two piece. We also have Defender wing top chequer plates too.
Sliding Side Windows for Defender 110 2-Door 200TDI, 300TDI, TD5 & PUMA TDCI (50/50 radius) - Dark Tinted - Pair
- Sold as a pair, if you want two windows each side of your vehicle, then you will need to order TWO pairs. We have developed matching interior window trims for this configuration.
- Slide opening Defender 110 2-door side windows. Corner radius are 50 degrees on all four corners. (50/50)
- Aperture cut-out size is: L: 770mm x H: 427mm. Entire window dimensions are: L: 800mm x 457mm. This is shorter than our Standard Defender windows for 90s or 110 4 door.
- Includes pinch catches for security, made of superior Mazak casting (Zinc, Magnesium and Aluminium Alloy) for strength and corrosion resistance. Catch part numbers MTC8270 and MTC8271.
- Includes rubber seal/trim which covers over the rivet heads
- Could also be fitted to vans, horseboxes or any vehicle with the panel space for it.
- Manufactured by Masai. Made to original Land Rover quality - BUT they do not rattle or leak.
- Original quality Land Rover aluminium profile and catches.
- E43R toughened safety glass.
- Factory prepared tint - not a stuck on film. (Dark tint 70% or 30% no light transmission)
- Supplied as a pair - offside and nearside
- Easy to fit DIY
DOWNLOAD LINK: Fitting Instructions, also see fitting video above.
Read our article about the best way to locate your side windows HERE
Optional Extras
We think you may also be interested in these optional extras which you can see below and separately add to your shopping cart. Scroll down to "You May Also Like" section.
- Adhesive and Rivets Kit (SORRY, UK ONLY SHIPPING) - to affix the side windows (and to save you the hassle of going to the DIY store)
- Interior Window Trims for Defender 2 Door
- Rear heated door glass - (tinted to match) - Pre and post 2002 available
- Rear door glass retainer kit - IF your vehicle has a pre 2002 rear door
- Rear door glazing seal - IF your vehicle has a post 2002 rear door
- Rear quarter glass - (tinted to match) - (use template to cut apertures if needed)
- Rear quarter glass window RUBBER SEALS
- High Level Brake Light Mounting Studs
- High Level Brake Light - Masai Slimline OR Standard Red/Clear OR Standard 3 colour.
CUSTOMERS OUTSIDE THE UK: Sorry, we cannot ship window adhesive outside the UK due to customs issues, please do not order our Adhesive and Rivets Kit. You will need to source them locally. The Adhesive and Rivets kit below will give you a guide for what you need to source.
